{"title":"Process West Fuel Systems","description":null,"products":[{"product_id":"anti-surge-fuel-system-w-single-walbro-460-pump-ford-falcon-ba-bf","title":"Anti-Surge Fuel System w\/ Single Walbro 460 Pump - Ford Falcon BA\/BF","description":"\u003cp\u003eOur fuel anti-surge system is the ultimate in fuel delivery for your turbocharged Falcon.\u003c\/p\u003e\n\u003cp\u003eIn September of 2007 Process West released a bar-raising true plug and play anti-surge system for the BA\/BF Falcon. In 5 and a half years we sold more than 1500 units and it became the bench mark for fuel delivery in modern turbo Falcons.\u003c\/p\u003e\n\u003cp\u003eThe original system was based on a billet surge vessel with an externally mounted Bosch Motorsports 044 pump. Now in March of 2013 we have raised the bar once again. It was time to modernise the product and bring it up to date with the requirements of modern car fueling and fuel types.\u003c\/p\u003e\n\u003cp\u003eThe new system sees the pump (or pumps) mounted internally to an externally mounted anti-surge vessel. The vessel is mounted to the chassis rail just like the original Process West anti-surge system... this is not an in-tank system.\u003c\/p\u003e\n\u003cp\u003eOne of the main objectives when designing the system was making sure the system was easily upgradable when the need for higher fuel flows is required. The \"basic\" system comes installed with 1 x Walbro 460LPH pump and is a simple plug and play option.\u003c\/p\u003e\n\u003cp\u003eA second Walbro 460 can be easily added to the system either at the time of purchase or later down the track when the demand for greater fuel supply is required. We have a package that allows the second pump to be installed along with a Turbosmart FPR1200 fuel pressure regulator and all of the necessary hardware for easy installation with the factory fuel rail.\u003c\/p\u003e\n\u003cp\u003eAlternatively if you have an aftermarket dual entry fuel rail we have a complete fitting kit including Turbosmart FPR1200 regulator.\u003c\/p\u003e\n\u003ch4\u003eAssembling a fuel delivery system to suit your requirements\u003c\/h4\u003e\n\u003cp\u003eThe \"basic\" single Walbro 460 system will satisfy the fuel delivery requirements of 90% of applications. This single pump system will support 680 rear wheel kilowatts and is a simple plug and play system.\u003c\/p\u003e\n\u003cp\u003eWhen a second pump is added to the system the flow is greatly increased and the factory fuel pressure regulator is unable to control fuel pressure. At this point we need to address fuel pressure control.\u003c\/p\u003e\n\u003cp\u003eWhat we have done is put together a package that allows the factory fuel rail to stay in place and add a Turbosmart FPR1200 fuel pressure regulator to the system. This package is known as the Process West Stage 1 Fitting Kit.\u003c\/p\u003e\n\u003cp\u003eThe stage 1 fitting kit combines the outlets of the two pumps, provides a factory fuel pressure regulator by-pass plug, a Turbosmart FPR1200 regulator + all of the fittings to complete the installation.\u003c\/p\u003e\n\u003cp\u003eIf you have an aftermarket duel entry fuel rail then we have the Process West Stage 2 Fitting Kit. This kit keeps both pump outlets separate, utilizes -6 (3\/8in) hose size throughout, AN Speedflow fittings and the Turbosmart FPR1200 fuel pressure regulator.\u003c\/p\u003e\n\u003cp\u003eWhen purchasing a twin pump system it is worth noting that the system concludes at the pump outlets of the surge tank. From this point on you will need one of the fitting kits or if you wish you can source the fittings\/hoses etc and plumb it up yourself. You can spec the system with either 5\/16 hose tail barbs or -6 AN type fittings...\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794688856145,"sku":"PWBAFS01","price":1815.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/276.png?v=1791063866"},{"product_id":"anti-surge-fuel-system-w-twin-walbro-460-pump-ford-falcon-ba-bf","title":"Anti-Surge Fuel System w\/ Twin Walbro 460 Pump - Ford Falcon BA\/BF","description":"\u003cp\u003eOur fuel anti-surge system is the ultimate in fuel delivery for your turbocharged Falcon.\u003c\/p\u003e\n\u003cp\u003eIn September of 2007 Process West released a bar-raising true plug and play anti-surge system for the BA\/BF Falcon. In 5 and a half years we sold more than 1500 units and it became the bench mark for fuel delivery in modern turbo Falcons.\u003c\/p\u003e\n\u003cp\u003eThe original system was based on a billet surge vessel with an externally mounted Bosch Motorsports 044 pump. Now in March of 2013 we have raised the bar once again. It was time to modernise the product and bring it up to date with the requirements of modern car fueling and fuel types.\u003c\/p\u003e\n\u003cp\u003eThe new system sees the pump (or pumps) mounted internally to an externally mounted anti-surge vessel. The vessel is mounted to the chassis rail just like the original Process West anti-surge system... this is not an in-tank system.\u003c\/p\u003e\n\u003cp\u003eOne of the main objectives when designing the system was making sure the system was easily upgradable when the need for higher fuel flows is required. The \"basic\" system comes installed with 1 x Walbro 460LPH pump and is a simple plug and play option.\u003c\/p\u003e\n\u003cp\u003eA second Walbro 460 can be easily added to the system either at the time of purchase or later down the track when the demand for greater fuel supply is required. We have a package that allows the second pump to be installed along with a Turbosmart FPR1200 fuel pressure regulator and all of the necessary hardware for easy installation with the factory fuel rail.\u003c\/p\u003e\n\u003cp\u003eAlternatively if you have an aftermarket dual entry fuel rail we have a complete fitting kit including Turbosmart FPR1200 regulator.\u003c\/p\u003e\n\u003ch4\u003eAssembling a fuel delivery system to suit your requirements\u003c\/h4\u003e\n\u003cp\u003eThe \"basic\" single Walbro 460 system will satisfy the fuel delivery requirements of 90% of applications. This single pump system will support 680 rear wheel kilowatts and is a simple plug and play system.\u003c\/p\u003e\n\u003cp\u003eWhen a second pump is added to the system the flow is greatly increased and the factory fuel pressure regulator is unable to control fuel pressure. At this point we need to address fuel pressure control.\u003c\/p\u003e\n\u003cp\u003eWhat we have done is put together a package that allows the factory fuel rail to stay in place and add a Turbosmart FPR1200 fuel pressure regulator to the system. This package is known as the Process West Stage 1 Fitting Kit.\u003c\/p\u003e\n\u003cp\u003eThe stage 1 fitting kit combines the outlets of the two pumps, provides a factory fuel pressure regulator by-pass plug, a Turbosmart FPR1200 regulator + all of the fittings to complete the installation.\u003c\/p\u003e\n\u003cp\u003eIf you have an aftermarket duel entry fuel rail then we have the Process West Stage 2 Fitting Kit. This kit keeps both pump outlets separate, utilizes -6 (3\/8in) hose size throughout, AN Speedflow fittings and the Turbosmart FPR1200 fuel pressure regulator.\u003c\/p\u003e\n\u003cp\u003eWhen purchasing a twin pump system it is worth noting that the system concludes at the pump outlets of the surge tank. From this point on you will need one of the fitting kits or if you wish you can source the fittings\/hoses etc and plumb it up yourself. You can spec the system with either 5\/16 hose tail barbs or -6 AN type fittings...\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794688888913,"sku":"PWBAFS02","price":2160.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/275.png?v=1791063868"},{"product_id":"stage-1-fuel-system-fitting-kit-ford-falcon-ba-bf","title":"Stage 1 Fuel System Fitting Kit - Ford Falcon BA\/BF","description":"\u003cp\u003eThe Process West Ford Falcon Fuel Rail Fitting Kit includes all Speedflow fittings and fuel hose required, along with the TurboSmart FPR 1200 regulator.\u003c\/p\u003e\n\u003cp\u003eCan be used to plumb upto standard Ford Fuel Rail or the Process West Dual Entry Billet Fuel Rail\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794688921681,"sku":"PWBAFSkit-S1","price":670.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/274.png?v=1791063870"},{"product_id":"stage-2-fuel-system-fitting-kit-ford-falcon-ba-bf","title":"Stage 2 Fuel System Fitting Kit - Ford Falcon BA\/BF","description":"\u003cp\u003eThe Process West Ford Falcon Fuel Rail Fitting Kit includes all Speedflow fittings and fuel hose required, along with the TurboSmart FPR 1200 regulator.\u003c\/p\u003e\n\u003cp\u003eCan be used to plumb upto standard Ford Fuel Rail or the Process West Dual Entry Billet Fuel Rail\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794688954449,"sku":"PWBAFSkit-S2","price":765.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/273.png?v=1791063872"},{"product_id":"anti-surge-single-pump-fuel-system-wiring-harness-ford-falcon-ba-bf","title":"Anti-Surge Single Pump Fuel System Wiring Harness - Ford Falcon BA\/BF","description":"\u003cp\u003eOur fuel anti-surge system is the ultimate in fuel delivery for your turbocharged Falcon. This wiring Loom Transforms the Process West Ford Falcon Anti-Surge System into a plug'n play system, making the installion even easier and simple. The wiring harness adds to the system being the bench mark system for turbocharged Falcons on the market.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794688987217,"sku":"PWBAFS01wire","price":250.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/272.png?v=1791063873"},{"product_id":"anti-surge-twin-pump-fuel-system-wiring-harness-ford-falcon-ba-bf","title":"Anti-Surge Twin Pump Fuel System Wiring Harness - Ford Falcon BA\/BF","description":"\u003cp\u003eOur fuel anti-surge system is the ultimate in fuel delivery for your turbocharged Falcon. This wiring Loom Transforms the Process West Ford Falcon Anti-Surge System into a plug'n play system, making the installion even easier and simple. The wiring harness adds to the system being the bench mark system for turbocharged Falcons on the market.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794689019985,"sku":"PWBAFS02wire","price":290.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/271.png?v=1791063875"},{"product_id":"process-west-fg-xr6-turbo-fuel-anti-surge-primary-system-2026-catalogue","title":"Process West FG XR6 Turbo fuel anti-surge primary system","description":"\u003cp\u003eOur generation 3 fuel anti-surge system is the ultimate in fuel delivery for your turbocharged Falcon.\u003c\/p\u003e\n\u003cp\u003eThe new system sees the pump (or pumps) mounted internally to an externally mounted anti-surge vessel. The vessel is mounted to the chassis rail just like the original Process West anti-surge system... this is not an in-tank system.\u003c\/p\u003e\n\u003cp\u003eOne of the main objectives when designing the system was making sure the system was easily upgradable when the need for higher fuel flows is required. The \"basic\" system comes installed with 1 x Walbro 460LPH pump\/wiring harness and is a simple plug and play option.\u003c\/p\u003e\n\u003cp\u003eA second or third Walbro 460 can be easily added (see here for “add a pump” kit option) to the system either at the time of purchase or later down the track when the demand for greater fuel supply is required. We have a package that allows the second pump or third to be installed along with a Turbosmart FPR8 fuel pressure regulator and all of the necessary hardware for easy installation with the factory fuel rail.\u003c\/p\u003e\n\u003cp\u003eAlternatively if you have an aftermarket dual entry fuel rail we have a complete fitting kit including Turbosmart FPR8 regulator (\u003cspan\u003ePWFGFK2).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/products-270-3.png?v=1772673283\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/products-270-4.png?v=1772673307\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembling a fuel delivery system to suit your requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \"basic\" single Walbro 460 system will satisfy the fuel delivery requirements of 90% of applications. This single pump system will support 680 rear HP and is a simple plug and play system.\u003c\/p\u003e\n\u003cp\u003eWhen a second pump is added to the system the flow is greatly increased and the factory fuel pressure regulator is unable to control fuel pressure. At this point we need to address fuel pressure control.\u003c\/p\u003e\n\u003cp\u003eWhat we have done is put together a package that allows the factory fuel rail to stay in place and add a Turbosmart FPR8 fuel pressure regulator to the system. This package is known as the Process West Stage 1 Fitting Kit.\u003c\/p\u003e\n\u003cp\u003eThe stage 1 fitting kit provides a factory fuel pressure regulator by-pass plug, a Turbosmart FPR8 regulator + all of the fittings to complete the installation.\u003c\/p\u003e\n\u003cp\u003eIf you have an aftermarket dual entry fuel rail then we have the Process West Stage 2 Fitting Kit. The stage 2 fitting kit utilises -8 hose size throughout, AN Speedflow fittings and the Turbosmart FPR8 fuel pressure regulator.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794689052753,"sku":"PWFGFPS","price":2035.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_a315a275-a84b-4ed0-803d-b6e634afb5b7.png?v=1791063877"},{"product_id":"fg-fuel-anti-surge-additional-pump-kit-2026-catalogue","title":"FG Fuel Anti-surge Additional Pump Kit","description":"\u003cp\u003eIf you have purchased the primary fuel system (PWFGFPS) and want to add an additional pump or two you need the additional pump kit. Kit comes complete with wiring and is an easy fit.\u003c\/p\u003e\n\u003cp\u003eThe wiring harness comes pre-made with pins that simply plug into the primary wiring harness supplied with the primary fuel system.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/products-269-2.png?v=1772754210\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis image shows the second pump installed.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/products-269-3.png?v=1772754266\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis image shows the third pump installed.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794689085521,"sku":"PWFGFAP","price":675.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_96b17beb-4b79-40f0-82ab-c85fe451a795.png?v=1791063878"},{"product_id":"process-west-fg-xr6-turbo-fuel-stage-2-fitting-kit-2026-catalogue","title":"Process West FG XR6 Turbo Fuel Stage 2 Fitting Kit","description":"\u003cp\u003eAllows easy integration of the Turbosmart FPR8 fuel pressure regulator into the Process West primary fuel system. Designed to suit either the Process West fuel rail or other aftermarket rails.\u003c\/p\u003e\n\u003cp\u003e-8 supply to and from the fuel rail. The ultimate set up for big fuel supply.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/products-268-1.jpg?v=1772754787\" alt=\"\" width=\"274\" height=\"320\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis image shows the stage 2 fitting kit installed on surge body.\u003cbr\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794689118289,"sku":"PWFGFK2","price":765.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_c1a78920-f425-457c-ad81-c9acf9b3ea9c.png?v=1791063880"},{"product_id":"process-west-fg-xr6-turbo-fuel-stage-1-fitting-kit-2026-catalogue","title":"Process West FG XR6 Turbo Fuel Stage 1 Fitting Kit","description":"\u003cp\u003eAllows easy integration of the Turbosmart FPR8 fuel pressure regulator into the Process West primary fuel system. Designed to suit the factory fuel rail. If you have an aftermarket fuel rail, use our Stage 2: \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003ePWFGFK2\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/267.png?v=1772754698\" alt=\"\" width=\"275\" height=\"275\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis image shows the Stage 1 Fitting Kit installed onto surge body.\u003cbr\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794689151057,"sku":"PWFGK1","price":670.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_10c610ec-84b2-405b-a971-08a3db51c78f.png?v=1791063882"},{"product_id":"dual-entry-billet-fuel-rail-ford-falcon-fg","title":"Dual Entry Billet Fuel Rail - Ford Falcon FG","description":"\u003cp\u003eTo compliment our fuel tube system we have developed this dual entry fuel rail system. When using 2 x 044 pumps with the factory fuel rail and pressure regulator, we have found that the factory fuel pressure regulator can not keep the rail pressure low enough at light load and cruise speeds. The answer to this problem, is the new Process West dual entry fuel rail with Turbosmart FPR 1200 regulator.\u003c\/p\u003e\n \n\n \u003cp\u003eProcess West's Unique FG Billet Fuel Rail mounting system, allows the use of standard height injectors, as well as aftermarket longer injectors. The fuel rail is available on its own for those customers who wish to plumb up all the fuel line themselves, or can be purchased along with a complete fitting kit.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794690625617,"sku":"PWFGFR01","price":670.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/223.png?v=1791063940"},{"product_id":"dual-entry-billet-fuel-rail-ford-falcon-ba-bf","title":"Dual Entry Billet Fuel Rail - Ford Falcon BA\/BF","description":"\u003cp\u003eTo compliment our fuel tube system we have developed this dual entry fuel rail system. When using 2 x 044 pumps with the factory fuel rail and pressure regulator, we have found that the factory fuel pressure regulator can not keep the rail pressure low enough at light load and cruise speeds. The answer to this problem, is the new Process West dual entry fuel rail with Turbosmart FPR 1200 regulator.\u003c\/p\u003e\n \n\n \u003cp\u003eProcess West's Unique FG Billet Fuel Rail mounting system, allows the use of standard height injectors, as well as aftermarket longer injectors. The fuel rail is available on its own for those customers who wish to plumb up all the fuel line themselves, or can be purchased along with a complete fitting kit.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794690658385,"sku":"PWBAFR01","price":670.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/222.png?v=1791063942"},{"product_id":"anti-surge-fuel-system-w-twin-walbro-460-pump-subaru-08-14-wrx-sti","title":"Anti-Surge Fuel System w\/ Twin Walbro 460 Pump - Subaru 08-14 WRX\/STI","description":"\u003cp\u003eOur fuel anti-surge system is the ultimate in fuel delivery for your G3 WRX or STi.\u003c\/p\u003e\n\u003cp\u003eIn early 2008 Process West released a true plug and play anti-surge system for the MY97 to MY07 WRX\/STi. We sold many 100s of these units in the last 4 years.\u003c\/p\u003e\n\u003cp\u003eThe original system was based on a hand fabricated surge vessel with an externally mounted Bosch Motorsports 044 pump. Now in October of 2013 we have raised the bar. It was time to modernise the product and bring it up to date with the requirements of modern car fuelling and fuel types.\u003c\/p\u003e\n\u003cp\u003eThe new system sees the pump (or pumps) mounted internally to an externally mounted anti-surge vessel made from  6061 billet aluminium. The vessel is mounted just above the transmission cross member. This is not an in-tank system.\u003c\/p\u003e\n\u003cp\u003eOne of the main objectives when designing the system was making sure the system was easily upgradable when the need for higher fuel flows is required.  The “basic” system comes installed with 1 x Walbro 460 LPH pump and is a simple plug and play option. Alternatively we offer a twin Walbro 460 system.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2.4 litre capacity\u003c\/li\u003e\n\u003cli\u003eAbsolutely zero pump noise\u003c\/li\u003e\n\u003cli\u003eWalbro pumps come with built in check valve\u003c\/li\u003e\n\u003cli\u003eSystem can be easily upgradable from single system to twin system\u003c\/li\u003e\n\u003cli\u003eWiring harness included\u003c\/li\u003e\n\u003cli\u003eTotally hidden when viewing from engine bay\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe “basic” single 460 system will satisfy the fuel delivery requirements of 90% of applications. This single pump system will support 550kw at the wheels on petrol (gas) and is a simple plug and play system. Twin Walbro 460 system will support 750kw at the wheels on petrol (gas).\u003c\/p\u003e\n\u003cp\u003eWhen purchasing a twin pump system it is worth noting that the system concludes at the pump outlets of the surge tank. From this point on you will need plumb into your existing system.\u003c\/p\u003e\n\u003cp\u003eWhen a second pump is added to the system the flow is greatly increased and the factory fuel pressure regulator is unable to control fuel pressure. At this point you will need to install an aftermarket fuel pressure regulator. For this reason all twin pump systems are configured with -6 AN fittings at the pump outlets to enable ease of plumbing into after fuel rails etc.\u003c\/p\u003e\n\u003cp\u003eSingle pump systems come complete with all fuel lines etc to complete the installation.\u003c\/p\u003e\n\u003cp\u003eBoth systems come with a pre-assembled wiring harness. Wiring installation is very simple and only requires soldering of 2 wires.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794693443665,"sku":"PWFS04","price":2130.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/142.png?v=1791064014"},{"product_id":"anti-surge-fuel-system-w-single-walbro-460-pump-subaru-08-14-wrx-sti","title":"Anti-Surge Fuel System w\/ Single Walbro 460 Pump - Subaru 08-14 WRX\/STI","description":"\u003cp\u003e2.4 litre capacity\u003cbr\u003e\n Absolutely zero pump noise\u003cbr\u003e\n Walbro pumps come with built in check valve\u003cbr\u003e\n System can be easily upgradable from single system to twin system\u003cbr\u003e\n Wiring harness included\u003cbr\u003e\n Totally hidden when viewing from engine bay\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794693476433,"sku":"PWFS03","price":1765.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/141.png?v=1791064016"},{"product_id":"billet-fuel-rails","title":"Billet Fuel Rails","description":"\u003cp\u003eUnlike anything else on the market these fuel rails are proper \"machined from the solid\" billet rails, not some cheap machined extrusion pretending to be billet. With accommodation for massive \"-8\" fittings, these fuel rails will easily cope with large capacity fuel systems using new generation large capacity fuel injectors. The twin top and single end entry\/exits are designed to be configured as required. They are available to suit 11mm or 13mm diameter injectors, come supplied with two -8 plugs and mounting hardware to bolt up to either stock, or Process West Billet TGV's.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794693509201,"sku":"PWFR01","price":495.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794693541969,"sku":"PWFR01B","price":545.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/137_daa42450-0fc9-412e-8b7c-3370f1198a49.png?v=1791064018"}],"url":"https:\/\/longboostperformance.com\/collections\/process-west-fuel-systems.oembed","provider":"LongBoost Performance Parts","version":"1.0","type":"link"}