{"title":"Process West Intercoolers","description":null,"products":[{"product_id":"top-mount-intercooler-core","title":"Top Mount Intercooler Core","description":"\u003cp\u003eThe goal for the Process West Top Mount Intercooler was simple. Engineer the best-performing aftermarket top-mount on the market. By studying the common failures in the aftermarket, like poor ducting and inefficient core thickness, we built a cooling solution that sets a new standard for the Subaru platform.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cem\u003eThis TMIC does not include a splitter, though we strongly recommend running one. See our other models that include vehicle-specific splitters.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProcess West 90mm intercooler core\u003cbr\u003eHigh-flow moulded silicone Y-pipe\u003cbr\u003eMounting hardware and fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOptimal core thickness: 90mm\u003c\/strong\u003e\u003cbr\u003eMany competitors push 114mm (4.5\") cores on a \"bigger is better\" pitch. For a top-mount, where air has to make a sharp 90 degree turn through a bonnet scoop, too much thickness just creates resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur design uses a 90mm (3.5\") core. The air breathes through the core instead of hitting a wall. The result is lower outlet temps and more consistent power.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-flow silicone Y-pipe\u003c\/strong\u003e\u003cbr\u003eStandard aftermarket Y-pipes often push air unevenly, favouring one side of the core. Our custom-moulded silicone Y-pipe is built for even charge-air distribution across the entire entry tank.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven performance\u003c\/strong\u003e\u003cbr\u003eDyno testing is notoriously hard for top-mounts due to limited scoop airflow. Even so, back-to-back testing on our '05 WRX against the factory unit returned clear gains.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 115.5kW, up from the factory 107.5kW.\u003c\/li\u003e\n\u003cli\u003eThermal control: the PW unit peaked at 51°C in static dyno conditions, against 66°C for the stock unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnder three back-to-back runs to simulate heavy load, factory outlet temps climbed to 84°C. The Process West unit stayed far more stable.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOut on the road is the real test. During spirited mountain driving, the stock intercooler peaked at 72°C and kept climbing, with a noticeable loss of liveliness. The Process West system never exceeded 43°C.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cem\u003eUpgrade to the Process West TMIC and keep your Subaru cool, responsive and reliable under any conditions. Pair it with the matching hood scoop for your model to get the full benefit of the system.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e \u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e \u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e \u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e \u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e \u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794686267473,"sku":"PWTMIC00","price":1135.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794686300241,"sku":"PWTMIC00B","price":1135.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/PWTMIC00.png?v=1791063792"},{"product_id":"fitting-kit-verticooler-and-intake-manifold-subaru-15-21-va-wrx","title":"Fitting Kit - Verticooler and Intake Manifold - Subaru 15-21 VA WRX","description":"\u003cp\u003e\u003cstrong\u003eFitment Kit: Verticooler \u0026amp; Intake Manifold – Subaru WRX 2015–2021 (VA)\u003c\/strong\u003e\u003cbr\u003eThe Process West Fitting Kit is a dedicated hardware solution designed specifically for owners installing both the Process West Verticooler and the Process West Intake Manifold on a 2015–2021 Subaru WRX.\u003c\/p\u003e\n\u003cp\u003eWhile both components are designed for high performance, their increased dimensions compared to factory parts create clearance constraints when used together. This kit provides the necessary components to ensure a seamless and professional integration of both systems.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy and when this kit is required.\u003c\/strong\u003e\u003cbr\u003eWhen upgrading to a high-volume induction system, space within the VA WRX engine bay becomes limited. This kit addresses two specific fitment variables:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManifold Heigh\u003c\/strong\u003et: The Process West Intake Manifold (PWIM007) features a taller plenum than the original unit, which reduces the available clearance for under-hood ducting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDucting Alignment\u003c\/strong\u003e: The Verticooler (PWTMIC14B) includes an upgraded hood scoop and duct assembly to maximise airflow. Because the intake manifold sits higher, the standard Verticooler ducting is unable to fit correctly when used together.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"11\"\u003eIf you are running the Process West Verticooler and plan to upgrade to the Process West Intake Manifold (or vice versa), this fitting kit is an essential addition to ensure both components work in physical harmony.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Fitting_Kit_-_Verticooler_and_Intake_Manifold_-_Subaru_15-21_VA_PWIM007VFT_WRX.pdf?v=1775189025\" target=\"_blank\" rel=\"noopener\"\u003eView Install Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794686365777,"sku":"PWIM007VFT","price":310.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/262.png?v=1791063796"},{"product_id":"intercooler-kit-ford-ranger-py-v6-diesel-23","title":"Intercooler Kit - Ford Ranger PY V6 Diesel 23+","description":"\u003cp data-path-to-node=\"0\"\u003eThe Process West Upgraded Intercooler Kit is designed to enhance the thermal efficiency and power potential of the Ford Ranger and (NF) Amarok V6 diesel.\u003c\/p\u003e\n\u003cp data-path-to-node=\"0\"\u003eThis system provides a comprehensive cooling solution for drivers seeking consistent performance under demanding conditions.\u003c\/p\u003e\n\u003cp data-path-to-node=\"1\"\u003eThe kit utilises a direct replacement design for the factory intercooler and piping. This ensures a precise fit and simplified installation process.\u003c\/p\u003e\n\u003cp data-path-to-node=\"1\"\u003eThe core is constructed using a robust bar and plate design, which is engineered to withstand high boost pressures and rigorous off road use while maintaining structural integrity.\u003c\/p\u003e\n\u003cp data-path-to-node=\"2\"\u003eWith core dimensions of 480mm by 180mm by 125mm, this unit provides the largest volume of any factory replacement intercooler currently available.\u003c\/p\u003e\n\u003cp data-path-to-node=\"2\"\u003eThis increased capacity maximises airflow and heat rejection, addressing the thermal limitations of the original factory unit which can struggle to maintain efficiency even at standard power levels.\u003c\/p\u003e\n\u003cp data-path-to-node=\"3\"\u003eBy maintaining lower intake temperatures, the Process West Intercooler Kit allows for sustained engine performance and improved long term reliability.\u003c\/p\u003e\n\u003cp data-path-to-node=\"3\"\u003e \u003c\/p\u003e\n\u003cp data-path-to-node=\"3\"\u003e\u003cimg height=\"305\" width=\"565\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/9_146cd7de-695b-4f3f-ae35-c9433be3ab45.png?v=1773275830\"\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"3\"\u003e\u003cstrong\u003eDyno graph shows comparison of three back to back dyno Process West Vs stock intercooler.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLower three traces are the temperature outlet of the Process West intercooler.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCentre three traces are the factory intercooler outlet temperatures.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTop group is power output. It's easy to see the Process West shows unit shows a consistent power increase (12-15kw at the wheels)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Intercooler_Kit_-_Ford_Ranger_PY_V6_Diesel_VW_Amarok_V6_Diesel_-_PWNGIC01.pdf?v=1772845053\" target=\"_blank\" rel=\"noopener\"\u003eView Installtion Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794686562385,"sku":"PWNGIC01","price":2395.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794686595153,"sku":"PWNGIC01B","price":2395.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_b1fe5014-be90-4468-bc9a-750a35436ca4.png?v=1791063801"},{"product_id":"intercooler-kit-2023-nf-amarok-v6-diesel","title":"Intercooler Kit - 2023+ (NF) Amarok V6 Diesel","description":"\u003cp data-path-to-node=\"0\"\u003eThe Process West Upgraded Intercooler Kit is designed to enhance the thermal efficiency and power potential of the Ford Ranger and (NF) Amarok V6 diesel.\u003c\/p\u003e\n\u003cp data-path-to-node=\"0\"\u003eThis system provides a comprehensive cooling solution for drivers seeking consistent performance under demanding conditions.\u003c\/p\u003e\n\u003cp data-path-to-node=\"1\"\u003eThe kit utilises a direct replacement design for the factory intercooler and piping. This ensures a precise fit and simplified installation process.\u003c\/p\u003e\n\u003cp data-path-to-node=\"1\"\u003eThe core is constructed using a robust bar and plate design, which is engineered to withstand high boost pressures and rigorous off road use while maintaining structural integrity.\u003c\/p\u003e\n\u003cp data-path-to-node=\"2\"\u003eWith core dimensions of 480mm by 180mm by 125mm, this unit provides the largest volume of any factory replacement intercooler currently available.\u003c\/p\u003e\n\u003cp data-path-to-node=\"2\"\u003eThis increased capacity maximises airflow and heat rejection, addressing the thermal limitations of the original factory unit which can struggle to maintain efficiency even at standard power levels.\u003c\/p\u003e\n\u003cp data-path-to-node=\"3\"\u003eBy maintaining lower intake temperatures, the Process West Intercooler Kit allows for sustained engine performance and improved long term reliability.\u003c\/p\u003e\n\u003cp data-path-to-node=\"3\"\u003e \u003c\/p\u003e\n\u003cp data-path-to-node=\"3\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/9_146cd7de-695b-4f3f-ae35-c9433be3ab45.png?v=1773275830\" alt=\"\" width=\"565\" height=\"305\"\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"3\"\u003e\u003cstrong\u003eDyno graph shows comparison of three back to back dyno Process West Vs stock intercooler.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLower three traces are the temperature outlet of the Process West intercooler.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCentre three traces are the factory intercooler outlet temperatures.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTop group is power output. It's easy to see the Process West shows unit shows a consistent power increase (12-15kw at the wheels)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Intercooler_Kit_-_Ford_Ranger_PY_V6_Diesel_VW_Amarok_V6_Diesel_-_PWNGIC01.pdf?v=1772845053\" target=\"_blank\" rel=\"noopener\"\u003eView Installation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794686627921,"sku":"PWNGIC01","price":2395.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794686660689,"sku":"PWNGIC01B","price":2395.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_b9c7a765-e570-4cc8-abe6-bc28d95aeec3.png?v=1791063803"},{"product_id":"transmission-cooler-ford-ranger-py-v6-diesel-23","title":"Transmission Cooler - Ford Ranger PY V6 Diesel 23+","description":"\u003cp data-path-to-node=\"0\"\u003eThe Transmission Cooler Kit provides consistent thermal management for vehicles operating in high stress environments. Featuring a high performance bar and plate core and billet end tanks, the system increases cooling efficiency to ensure the gearbox remains within its ideal temperature range during heavy use.\u003c\/p\u003e\n\u003cp data-path-to-node=\"1\"\u003eA critical design element of this kit is its integration with the factory heat exchanger. Retaining the factory exchanger within the cooling loop is essential for maintaining proper fluid temperatures during light and medium loads, as it prevents the transmission from operating at temperatures that are too low for optimal performance.\u003c\/p\u003e\n\u003cp data-path-to-node=\"2\"\u003eTo ensure the integrity of the system, the kit is equipped with Gates LOLA 300 psi hose and 400 series Speedflow fittings. These components are selected for their durability and their ability to provide a secure, reliable connection for the lifespan of the vehicle.\u003c\/p\u003e\n\u003cp data-path-to-node=\"3\"\u003eThe Process West Transmission Cooler Kit offers a functional and precise cooling solution for drivers who require dependable performance and long term mechanical protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Transmission_Cooler_Ford_Ranger_PY_V6_Diesel_23_NF_Amarok_V6_Diesel_23_-_PWNGTC01.pdf?v=1772845053\" target=\"_blank\" rel=\"noopener\"\u003eView Installation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794686726225,"sku":"PWNGTC01","price":1340.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794686758993,"sku":"PWNGTC01B","price":1340.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_972075b4-ad35-4ddd-99bf-314678592e2c.png?v=1791063806"},{"product_id":"transmission-cooler-2023-nf-amarok-v6-diesel","title":"Transmission Cooler - 2023+ (NF) Amarok V6 Diesel","description":"\u003cp data-path-to-node=\"0\"\u003eThe Transmission Cooler Kit provides consistent thermal management for vehicles operating in high stress environments. Featuring a high performance bar and plate core and billet end tanks, the system increases cooling efficiency to ensure the gearbox remains within its ideal temperature range during heavy use.\u003c\/p\u003e\n\u003cp data-path-to-node=\"1\"\u003eA critical design element of this kit is its integration with the factory heat exchanger. Retaining the factory exchanger within the cooling loop is essential for maintaining proper fluid temperatures during light and medium loads, as it prevents the transmission from operating at temperatures that are too low for optimal performance.\u003c\/p\u003e\n\u003cp data-path-to-node=\"2\"\u003eTo ensure the integrity of the system, the kit is equipped with Gates LOLA 300 psi hose and 400 series Speedflow fittings. These components are selected for their durability and their ability to provide a secure, reliable connection for the lifespan of the vehicle.\u003c\/p\u003e\n\u003cp data-path-to-node=\"3\"\u003eThe Process West Transmission Cooler Kit offers a functional and precise cooling solution for drivers who require dependable performance and long term mechanical protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Transmission_Cooler_Ford_Ranger_PY_V6_Diesel_23_NF_Amarok_V6_Diesel_23_-_PWNGTC01.pdf?v=1772845053\" target=\"_blank\" rel=\"noopener\"\u003eView Installation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"silver","offer_id":62794686791761,"sku":"PWNGTC01","price":1340.0,"currency_code":"AUD","in_stock":true},{"title":"black","offer_id":62794686824529,"sku":"PWNGTC01B","price":1340.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_8d8e3436-4114-485b-9f09-43a1e447841a.png?v=1791063806"},{"product_id":"stage-1-piping-to-stage-2-core-conversion-kit-next-gen-ranger-raptor","title":"Stage 1 Piping To Stage 2 Core Conversion Kit - Next Gen Ranger Raptor","description":"\u003cp\u003eAlready running the superior airflow of our Stage 1 Intercooler Piping Kit? Now you can complete your upgrade path to maximum cooling performance without replacing your perfectly good piping!\u003c\/p\u003e\n \n\n \u003cp\u003eThis Conversion kit is the essential hardware package for owners who are stepping up their intercooler core from the Process West Stage 1 to the massive Process West Stage 2 Intercooler Core.\u003c\/p\u003e\n \n\n \u003cp\u003eBuilt for a seamless upgrade - The Process West Stage 2 Intercooler core is significantly larger than the Stage 1, requiring specific components to align correctly with your existing Stage 1 piping. This kit provides those crucial connecting pieces to ensure a precise, leak-free connection.\u003c\/p\u003e\n \n\n \u003cp\u003ePrecision Piping - The lightweight CNC mandrel-bent aluminum intercooler piping ensures smooth, unrestricted airflow and a perfect fit between your Stage 1 Piping and the Stage 2 Core.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Stage_1_Piping_To_Stage_2_Core_Conversion_Kit_-_Next_Gen_Ranger_Raptor_-_PWRR0102R.pdf?v=1771555102\" target=\"_blank\" rel=\"noopener\"\u003eView Install Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Black","offer_id":62794686922833,"sku":"PWRR0102B","price":320.0,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":62794686955601,"sku":"PWRR0102R","price":320.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/338_9b2064f9-4fce-418b-9dc0-ed5b62311cb1.png?v=1791063811"},{"product_id":"stage-2-front-mount-intercooler-2022-wrx","title":"Stage 2 Front Mount Intercooler - 2022+ WRX","description":"\u003cp\u003eThe Process West Stage 2 Front Mount Intercooler (FMIC) is the definitive cooling solution for the FA24 engine. Engineered for drivers seeking maximum efficiency and consistent power, this kit transforms the performance profile of your VB WRX.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuperior Thermal Performance\u003c\/strong\u003e\u003cbr\u003eDesigned to drastically lower intake air temperatures (IATs), this intercooler ensures your Subaru maintains peak timing and boost pressure even under heavy load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Density Core:\u003c\/strong\u003e Massive 525 x 350 x 100mm core featuring high internal fin density.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimised Airflow: \u003c\/strong\u003eHigh-flow cast aluminum end tanks ensure even air distribution across the entire core surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Response:\u003c\/strong\u003e Experience sharper throttle response and reliable power throughout the entire RPM range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUncompromised Engineering\u003c\/strong\u003e\u003cbr\u003eMost front mount kits require significant sacrifices. The Process West design prioritises both performance and vehicle integrity:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo-Cut Installation: \u003c\/strong\u003eThis is a true bolt-on kit. No cutting or permanent modification to your front bumper is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003cbr\u003eEverything needed for a professional-grade installation is in the box:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStage 2 Front Mount Intercooler Core\u003c\/li\u003e\n\u003cli\u003eModel-specific mounting brackets\u003c\/li\u003e\n\u003cli\u003eMulti-layer silicone couplers\u003c\/li\u003e\n\u003cli\u003eStainless steel hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eElevate your VB WRX build with the cooling foundation it deserves.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Stage_2_Front_Mount_Intercooler_Intercooler_Piping_Kit_2022_WRX_-_PWFMIC11-core_PWFMIC1011B-pipe.pdf?v=1771553797\" target=\"_blank\" rel=\"noopener\"\u003eStage 2 Intercooler Kit Installation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794686988369,"sku":"PWFMIC11-core","price":1980.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794687021137,"sku":"PWFMIC11B-core","price":2130.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/333.png?v=1791063814"},{"product_id":"stage-1-front-mount-intercooler-2022-wrx-1","title":"Stage 1 Front Mount Intercooler - 2022+ WRX","description":"\u003cp\u003eThe Process West Stage 1 Front Mount Intercooler for the 2022+ VB WRX is the essential cooling upgrade for those looking to handle the demands of the FA24.\u003c\/p\u003e\n\u003cp\u003eThis Intercooler delivers superior air intake cooling, directly lowering air intake temperature, improving efficiency, throttle response, and a more consistent performance across the rev range.\u003c\/p\u003e\n\u003cp\u003eThis Intercooler offers a generous 525 x 350 x 75mm core with greater internal fin density than the factory core, met with hi-flowing cast intercooler end tanks designed for maximum flow distribution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeep The Crash Bar\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis Intercooler's unique design places the core deeper into the engine bay, allowing for the retention of the factory crash bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on Installation \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAbsolutely NO cutting or permanent modification to the front bumper is necessary for installation. All necessary brackets, silicone couplers, and stainless steel hose clamps are included.\u003c\/p\u003e\n\u003cp\u003eWhether you’re pushing for peak performance gains or a reliable, cool performance boost, the Process West FMIC is the bedrock for your VB WRX build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Stage_1_FMIC_Piping_Kit_-_PWFMIC10-core_PWFMIC1011B-pipe.pdf?v=1771553797\" target=\"_blank\" rel=\"noopener\"\u003eView Install Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794687053905,"sku":"PWFMIC10-core","price":1845.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794687086673,"sku":"PWFMIC10B-core","price":1960.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/products-333-1.png?v=1791063815"},{"product_id":"stage-1-front-mount-intercooler-kit-pw-intake-fitment-2022-wrx","title":"Stage 1 Front Mount Intercooler Kit - PW Intake Fitment - 2022+ WRX","description":"\u003cp\u003eThe Process West Stage 1 Front Mount Intercooler Kit for the 2022+ VB WRX is the essential cooling upgrade for those looking to handle the demands of the FA24.\u003c\/p\u003e\n\u003cp\u003eThis version of the Process West Stage 1 Front Mount Intercooler Kit is intended exclusively for those looking to install the Process West VB FA24 WRX Intake Manifold (Standard \u0026amp; Port Injection), allowing for an easy fitment without the need for an Adaptor Pipe (PWIM010AP).\u003c\/p\u003e\n\u003cp\u003eThe reason Process West provides this alternative Kit is due to the new throttle body position of the Process West Intake Manifold, which is lower and closer to the firewall than the factory design. This kit will not be compatible with the factory intake.\u003c\/p\u003e\n\u003cp\u003eIf you do plan to install the Intake Manifold at a later date, we recommend our traditional Stage 1 Kit (PWFMIC10B) which is compatible with the factory intake. When you upgrade to the Process West Intake Manifold, our Adaptor Pipe (PWIM010AP) will make your Intercooler kit compatible with the Intake.\u003c\/p\u003e\n\u003cp\u003eThis Intercooler Kit delivers superior air intake cooling, directly lowering air intake temperature, improving efficiency, throttle response, and a more consistent performance across the rev range.\u003c\/p\u003e\n\u003cp\u003eThis Intercooler offers a generous 525 x 350 x 75mm core with greater internal fin density than the factory core, met with hi-flowing cast intercooler end tanks designed for maximum flow distribution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Piping \u003c\/strong\u003e- The lightweight CNC mandrel-bent aluminum intercooler piping ensures smooth, unrestricted airflow and a perfect fit with the PW Intake Manifold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeep The Crash Bar! \u003c\/strong\u003eThis Intercooler's unique design places the core deeper into the engine bay, allowing for the retention of the factory crash bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on Installation \u003c\/strong\u003e- Absolutely NO cutting or permanent modification to the front bumper is necessary for installation. All necessary brackets, silicone couplers, and stainless steele hose clamps are included.\u003c\/p\u003e\n\u003cp\u003eWhether you’re pushing for peak performance gains or a reliable, cool performance boost, the Process West FMIC is the bedrock for your VB WRX build.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794687119441,"sku":"PWFMIC10IM","price":2225.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794687152209,"sku":"PWFMIC10BIM","price":2330.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/331.png?v=1791063817"},{"product_id":"stage-2-front-mount-intercooler-kit-pw-intake-fitment-2022-wrx","title":"Stage 2 Front Mount Intercooler Kit - PW Intake Fitment - 2022+ WRX","description":"\u003cp\u003eThe Process West Stage 2 Front Mount Intercooler Kit for the 2022+ VB WRX is the essential cooling upgrade for those looking to take their FA24 to the next level.\u003c\/p\u003e\n\u003cp\u003eThis version of the Process West Stage 2 Front Mount Intercooler Kit is intended exclusively for those looking to install the Process West VB FA24 WRX Intake Manifold (Standard \u0026amp; Port Injection), allowing for an easy fitment without the need for an Adaptor Pipe (PWIM010AP).\u003c\/p\u003e\n\u003cp\u003eThe reason Process West provides this alternative Kit is due to the new throttle body position of the Process West Intake Manifold, which is lower and closer to the firewall than the factory design. This kit will not be compatible with the factory intake.\u003c\/p\u003e\n\u003cp\u003eIf you do plan to install the Intake Manifold at a later date, we recommend our traditional Stage 2 Kit (PWFMIC11B) which is compatible with the factory intake. When you upgrade to the Process West Intake Manifold, our Adaptor Pipe (PWIM010AP) will make your Intercooler kit compatible with the Intake.\u003c\/p\u003e\n\u003cp\u003eThis Intercooler Kit delivers superior air intake cooling, directly lowering air intake temperature, improving efficiency, throttle response, and a more consistent performance across the rev range.\u003c\/p\u003e\n\u003cp\u003eThis Intercooler offers a generous 525 x 350 x 200mm core with greater internal fin density than the factory core, met with hi-flowing cast intercooler end tanks designed for maximum flow distribution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Piping\u003c\/strong\u003e - The lightweight CNC mandrel-bent aluminum intercooler piping ensures smooth, unrestricted airflow and a perfect fit with the PW Intake Manifold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-on Installation \u003c\/strong\u003e- Absolutely NO cutting or permanent modification to the front bumper is necessary for installation. All necessary brackets, silicone couplers, and stainless steel hose clamps are included.\u003c\/p\u003e\n\u003cp\u003eWhether you’re pushing for peak performance gains or a reliable, cool performance boost, the Process West FMIC is the bedrock for your VB WRX build.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794687217745,"sku":"PWFMIC11IM","price":2385.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794687250513,"sku":"PWFMIC11BIM","price":2490.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/329.png?v=1791063819"},{"product_id":"intercooler-piping-kit-2022-wrx","title":"Intercooler Piping Kit - 2022+ WRX","description":"\u003cp\u003eUpgrade your Intercooler airflow system for your 2022+ VB WRX with the Process West Intercooler Piping Kit.\u003c\/p\u003e\n\u003cp\u003eCompatible with both the Process West Stage 1 and Stage 2 Front Mount Intercooler Core, this kit delivers superior airflow and perfect fitment.\u003c\/p\u003e\n\u003cp\u003eThis piping kit will also allow for a more seamless fitment with a custom or third-party intercooler.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Piping\u003c\/strong\u003e - The lightweight CNC mandrel-bent aluminum intercooler piping ensures smooth, unrestricted airflow and a perfect fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete Hardware\u003c\/strong\u003e - The kit includes all necessary high-quality silicone couplers, stainless steel hose clamps, and brackets to complete the installation.\u003c\/p\u003e\n\u003cp\u003eThe Process West Intercooler Piping Kit is the essential backbone for any serious performance build utilising a Front Mount Intercooler on the VB WRX.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Stage_2_Front_Mount_Intercooler_Intercooler_Piping_Kit_2022_WRX_-_PWFMIC11-core_PWFMIC1011B-pipe.pdf?v=1771553797\" target=\"_blank\" rel=\"noopener\"\u003ePiping Kit + Stage 2 Front Mount Installation Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Black","offer_id":62794687283281,"sku":"PWFMIC10\/11B-pipe","price":535.0,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":62794687316049,"sku":"PWFMIC10\/11R-pipe","price":535.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/3_99950621-3aed-4505-8515-62f1e987d211.png?v=1791063825"},{"product_id":"front-mount-intercooler-kit-subaru-06-07-gd-wrx-sti","title":"Front Mount Intercooler Kit - Subaru 06-07 GD WRX\/STI","description":"\u003cp\u003e\u003cstrong\u003e2006-2007 Subaru WRX\/STI Front Mount Intercooler Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Front Mount Intercooler Kit is one of the best off-the-shelf cooling upgrades available for the 2006–07 Subaru WRX\/STI.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eCore specifications.\u003c\/strong\u003e The 685 x 285 x 100mm bar and plate intercooler core features high-flow polished aluminium end tanks, ensuring smooth airflow and effective charge air cooling into the engine.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eComplete kit.\u003c\/strong\u003e Mandrel bent aluminium piping is included, making this a comprehensive, ready-to-install solution with no additional components required.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA straightforward upgrade for serious WRX\/STI performance.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794687348817,"sku":"PWFMIC02.3","price":2220.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794687381585,"sku":"PWFMIC02.3B","price":2290.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_3e1aabef-2172-4b46-82c8-c97d754b315f.png?v=1791063823"},{"product_id":"front-mount-intercooler-kit-subaru-03-05-gd-wrx-sti","title":"Front Mount Intercooler Kit - Subaru 03-05 GD WRX\/STI","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eFront Mount Intercooler Kit — 2003–05 Subaru WRX\/STI\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Front Mount Intercooler Kit is one of the best off-the-shelf cooling upgrades available for the 2003–05 Subaru WRX\/STI.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eCore specifications.\u003c\/strong\u003e The 685 x 285 x 100mm bar and plate intercooler core features high-flow polished aluminium end tanks, ensuring smooth airflow and effective charge air cooling into the engine.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eComplete kit.\u003c\/strong\u003e Mandrel bent aluminium piping is included, making this a comprehensive, ready-to-install solution with no additional components required.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA straightforward upgrade for serious WRX\/STI performance.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794687414353,"sku":"PWFMIC02.2","price":2220.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794687447121,"sku":"PWFMIC02.2B","price":2290.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_c23d04d6-9baf-46cd-a52f-4c2591d08e64.png?v=1791063825"},{"product_id":"front-mount-intercooler-kit-subaru-01-02-gd-wrx-sti","title":"Front Mount Intercooler Kit - Subaru 01-02 GD WRX\/STI","description":"\u003cp\u003e\u003cstrong\u003e2001-2002 Subaru WRX\/STI Front Mount Intercooler Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Process West Front Mount Intercooler Kit for the 01-02 Subaru WRX\/STI includes a 685 x 285 x 100mm bar \u0026amp; plate intercooler core, with hi-flow polished aluminium end tanks. This allows for smooth flow and effective cooling of the charge air entering the engine. Along with mandrel bent aluminium piping this Front Mount Intercooler Kit offers one of the best off-the-shelf options for the 01-02 Subaru WRX\/STI on the market.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794687545425,"sku":"PWFMIC02.1","price":2220.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794687578193,"sku":"PWFMIC02.1B","price":2290.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_7f01ac98-4632-4ba7-8bd7-5567b361ddd5.png?v=1791063826"},{"product_id":"next-gen-ranger-raptor-transmission-cooler","title":"Next Gen Ranger Raptor Transmission Cooler","description":"\u003cp\u003eProcess West Ford Ranger Raptor V6 Transmission Cooler Kit. Fits With Factory Type Intercoolers and Process West Stage 1 and 2 Intercooler.\u003c\/p\u003e\n \n\n \u003cp\u003eGet ready to dominate any high stress driving environment with confidence, thanks to the Process West Ford Ranger Raptor V6 Transmission Cooler Kit. Engineered to perfection, this kit ensures your transmission stays cool under the most extreme conditions, allowing you to push the limits of your driving adventures.\u003c\/p\u003e\n \n\n \u003cp\u003eFeaturing a high-performance bar and plate core and billet end tanks, our transmission cooler kit delivers unmatched durability and efficiency, keeping your gearbox operating at optimal temperatures for peak performance.\u003c\/p\u003e\n \n\n \u003cp\u003eEquipped with Gates LOLA 300 psi hose and 400 series Speedflow fittings, our kit guarantees reliability and precision over the course of the vehicles life.\u003c\/p\u003e\n \n\n \u003cp\u003eCompatible with our Stage 2 intercooler core, this kit seamlessly integrates with your existing setup, providing a comprehensive cooling solution for your Ranger Raptor V6.\u003c\/p\u003e\n \n\n \u003cp\u003eUpgrade your driving experience today with Process West Transmission Cooler Kit - where rugged performance meets uncompromising reliability!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Next_Gen_Ranger_Raptor_Transmission_Cooler_-_PWRRTC01.pdf?v=1771555108\" target=\"_blank\" rel=\"noopener\"\u003eView Install Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794687971409,"sku":"PWRRTC01","price":1340.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794688004177,"sku":"PWRRTC01B","price":1340.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/NextGenRangerRaptorTransmissionCooler-PWRRTC01.png?v=1791063839"},{"product_id":"next-gen-ranger-raptor-stage-1-intercooler-upgrade","title":"Next Gen Ranger Raptor Stage 1 Intercooler Upgrade","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Stage 1 Intercooler is a direct bolt-in replacement for the factory unit on the Ford Ranger Raptor V6, engineered to deliver improved cooling efficiency, consistent power delivery, and long-term reliability on road or off.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eLargest factory replacement core on the market.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eAt 480 x 180 x 125mm, this bar and plate core maximises airflow and outperforms any comparable factory replacement option. Built to handle high boost pressures and demanding off-road conditions without compromise.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eCompatible with factory piping.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Stage 1 intercooler works directly with the existing factory piping. For those looking to go further, the Process West Intercooler Hard Piping Kit is available separately in black or red (PWRR01B-pipe \/ PWRR01R-pipe).\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eRemoves the factory shutter system.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe factory intercooler shutter system is eliminated, ensuring unrivalled cooling efficiency and consistent power delivery across all conditions and terrain.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eBolt-in installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eNo cutting or permanent modification required. Designed for a straightforward fit with minimal downtime.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA proven foundation for your Next Gen Ranger Raptor build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Next_Gen_Ranger_Raptor_Stage_1_Intercooler_Upgrade_-_PWRRIC01.pdf?v=1771555109\" target=\"_blank\" rel=\"noopener\"\u003eView Install Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794688036945,"sku":"PWRRIC01","price":1760.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794688069713,"sku":"PWRRIC01B","price":1760.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_404f79c9-d9ae-45d8-820b-9fbbcbed00ef.png?v=1791063842"},{"product_id":"intercooler-piping-kit-next-gen-ranger-raptor-univerisal-compatibility","title":"Intercooler Piping Kit - Next Gen Ranger Raptor - Universal Compatibility","description":"\u003cp\u003eFORD RANGER RAPTOR V6 HARD PIPE KIT. Compatible With Factory Intercooler and Stage 1 Process West Intercooler. This kit also allows for a far more accessible fit to other aftermarket intercoolers.\u003c\/p\u003e\n \u003cp\u003eExperience improved and reliable performance with the Process West Ford Ranger Raptor Intercooler Hard Piping Kit! Designed to elevate your driving experience, this kit is engineered to perfection, replacing factory plastic piping with durable 2.5-inch mandrel-bent aluminium.\u003c\/p\u003e\n \u003cp\u003eSay goodbye to the limitations of the split hoses and loss of boost with the factory plastic piping, (especially when tuning your Raptor for higher output). Our kit ensures optimal airflow and cooling efficiency, unleashing the true potential of your vehicle.\u003c\/p\u003e\n \u003cp\u003eCompatible with the factory intercooler and Process West Stage 1 Intercooler, while offering a far more aligned fitment to other aftermarket factory replacement intercoolers.\u003c\/p\u003e\n \u003cp\u003eUpgrade your Ford Ranger Raptor today and feel the difference with Process West Intercooler Hard Piping Kit - where performance meets durability!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Intercooler_Piping_Kit_-_Next_Gen_Ranger_Raptor_-_Universal_Compatibility_-_PWRR01B-pipe_4df68a02-33c7-476c-b413-9c2132846c7e.pdf?v=1780630004\" target=\"_blank\" rel=\"noopener\"\u003eView Install Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Black","offer_id":62794688102481,"sku":"PWRR01B-pipe","price":1340.0,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":62794688135249,"sku":"PWRR01R-pipe","price":1340.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_72a74fb6-799f-4e42-bd50-44c44d9682f6.png?v=1791063843"},{"product_id":"intercooler-piping-kit-next-gen-ranger-raptor","title":"Intercooler Piping Kit - Next Gen Ranger Raptor","description":"\u003cp\u003eThis piping kit is only compatible with the Process West stage 2 intercooler.\u003c\/p\u003e\n \n\n \u003cp\u003eThe Next Ranger Raptor is still relatively new but is it common place for the factory plastic piping to split especially when the vehicle is tuned. (more boost).\u003c\/p\u003e\n \n\n \u003cp\u003eOur piping kit completely replaces all of the factory plastic piping with 2.5in mandrel bent aluminium tube and high quality 5 ply silicon hoses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Intercooler_Piping_Kit_-_Next_Gen_Ranger_Raptor_-_PWRRIC02B-pipe_3.pdf?v=1772155908\" target=\"_blank\" rel=\"noopener\"\u003eView Install Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Black","offer_id":62794688299089,"sku":"PWRRIC02B-pipe","price":1340.0,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":62794688331857,"sku":"PWRRIC02R-pipe","price":1340.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_9219278c-2459-41f2-b615-7c41258af0e3.png?v=1791063849"},{"product_id":"stage-2-intercooler-next-gen-ranger-raptor","title":"Stage 2 Intercooler - Next Gen Ranger Raptor","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Stage 2 Intercooler is the largest intercooler available for the Next Gen Ranger Raptor, purpose-built for owners who need more cooling capacity than the Stage 1 factory replacement can provide.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eLargest core on the market.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eAt 510 x 550 x 70mm, this is the biggest intercooler core available for the Next Gen Raptor. The increased core size delivers greater cooling surface area, lower intake air temperatures, and more consistent power delivery under hard use, whether that is towing, off-road driving, or sustained high-performance conditions.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eMinor trim required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA small trim to the factory plastic is required for fitment. This is a straightforward process and does not affect the structural integrity or appearance of the vehicle.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eCompatible with factory and aftermarket piping.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Stage 2 intercooler works directly with the factory intercooler piping. For those looking to maximise the system further, the Process West Intercooler Hard Piping Kit is available separately in black or red (PWRRIC02B-pipe \/ PWRRIC02R-pipe).\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe benchmark intercooler upgrade for the serious Next Gen Ranger Raptor build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Stage_2_Intercooler_-_Next_Gen_Ranger_Raptor_-_PWRRIC02.pdf?v=1771555109\" target=\"_blank\" rel=\"noopener\"\u003eView Install Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794688364625,"sku":"PWRRIC02","price":2250.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794688397393,"sku":"PWRRIC02B","price":2250.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_fa753750-1981-4f7f-b8a1-efc9927400ea.png?v=1791063852"},{"product_id":"stage-2-front-mount-intercooler-kit-2022-wrx","title":"Stage 2 Front Mount Intercooler Kit - 2022+ WRX","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Stage 2 Front Mount Intercooler Kit is the complete cooling solution for the VB WRX. Everything you need to transform your FA24's thermal performance, in one box.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003ePairing the Stage 2 Intercooler's massive 525 x 350 x 100mm high-density bar and plate core with lightweight CNC mandrel bent aluminium piping, this kit delivers a seamless, high-flow system from end to end.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eSuperior thermal performance.\u003c\/strong\u003e Designed to drastically lower intake air temperatures (IATs), ensuring your Subaru maintains peak timing and boost pressure even under heavy load consistently, across the entire RPM range.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eTrue bolt-on fitment.\u003c\/strong\u003e No cutting. No permanent modification to your front bumper. Just a clean, professional install using everything included in the kit.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eYour finish, your choice.\u003c\/strong\u003e Available in black powdercoat or raw aluminium. Built to look as good as it performs.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eStage 2 Front Mount Intercooler Core (525 x 350 x 100mm)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAluminium intercooler piping\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eModel-specific mounting brackets\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eMulti-layer silicone couplers\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eStainless steel hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe complete foundation for your VB WRX build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Stage_2_Front_Mount_Intercooler_Intercooler_Piping_Kit_2022_WRX_-_PWFMIC11-core_PWFMIC1011B-pipe.pdf?v=1771553797\" target=\"_blank\" rel=\"noopener\"\u003eView Install Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794688561233,"sku":"PWFMIC11","price":2550.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794688594001,"sku":"PWFMIC11B","price":2665.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_8e3e8a95-8bf2-414e-b559-317e3ac12d2c.png?v=1791063857"},{"product_id":"stage-1-front-mount-intercooler-kit-2022-wrx","title":"Stage 1 Front Mount Intercooler Kit - 2022+ WRX","description":"\u003cp\u003eThe new Process West Front Mount Intercooler Kit for the 2022+ VB WRX allows for superior air intake cooling. This is achieved by using light-weight CNC mandrel bent aluminuim intercooler piping and a large 525x350x75mm bar \u0026amp; plate intercooler core.\u003c\/p\u003e\n \n\n \u003cp\u003eThe beautiful thing about this front mount kit is that there is no cutting required in order to fit and install, and everything you need to complete install is included in the kit - i.e. hose clamps, intercooler brackets etc. With a choice of a black powdercoated or silver finished intercooler, its not hard to see why this is the best option for you car.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Stage_1_FMIC_Piping_Kit_-_PWFMIC10-core_PWFMIC1011B-pipe.pdf?v=1771553797\" target=\"_blank\" rel=\"noopener\"\u003eView Install Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794688626769,"sku":"PWFMIC10","price":2380.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794688659537,"sku":"PWFMIC10B","price":2495.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_438546a6-3521-40e2-8eac-e032ec85b02e.png?v=1791063859"},{"product_id":"charge-pipe-kit-2022-wrx-factory-intercooler-and-pw-intercooler","title":"Charge Pipe Kit - 2022+ WRX (Factory Intercooler and PW Intercooler)","description":"\u003cp\u003eIntroducing the ultimate solution to your 2022 VB WRX's restrictive and unsightly factory chargepipe - the upgraded Chargepipe from Process West!\u003c\/p\u003e\n \n\n \u003cp\u003eSay goodbye to the restrictions of your stock Chargepipe and welcome the Process West new and improved Chargepipe with an impressive 52% larger internal diameter. Made from a single piece aluminum casting, it is built to last and withstand even the most demanding driving conditions. Plus, the Process West Chargepipe features a CNC-machined billet circlip adapter for the turbo outlet, ensuring maximum efficiency and power output.\u003c\/p\u003e\n \n\n \u003cp\u003eYour Process West Chargepipe is designed for a simple fitment, taking only about 20 minutes to install. You can easily upgrade your vehicle without having to deal with complicated installation procedures. Moreover, it is compatible with both the factory intercooler and Process West intercooler, so you can choose the intercooler that best suits your driving needs and budget.\u003c\/p\u003e\n \n\n \u003cp\u003eAvailable in a sleek wrinkle black finish or a sporty \"STi\" wrinkle red, our Chargepipe is not only a functional upgrade but also adds an eye-catching detail to your engine bay. Get ready to turn heads with your Process West upgraded 2022 VB WRX!\u003c\/p\u003e\n \n\n \u003cp\u003eUpgrade your chargepipe today and experience the power, performance, and style that you and your WRX deserve.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Charge_Pipe_Kit_-_2022_WRX_Factory_Intercooler_and_PW_Intercooler_-_PWTMIC17CPB.pdf?v=1771553792\" target=\"_blank\" rel=\"noopener\"\u003eView Install Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Black","offer_id":62794688725073,"sku":"PWTMIC17CPB","price":495.0,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":62794688757841,"sku":"PWTMIC17CPR","price":495.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_2957ae97-d1ae-4b07-bb76-da43e7d64647.png?v=1791063862"},{"product_id":"top-mount-intercooler-kit-22-wrx","title":"Top Mount Intercooler Kit - 22+ WRX","description":"\u003cp\u003eThe Process West Top Mount Intercooler is the largest top mount upgrade available for the 2022+ VB WRX. Engineered to extract the full potential of the platform, it delivers improved cooling efficiency, reduced turbo lag, and sharper throttle response.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLargest core on the market.\u003c\/strong\u003e\u003cbr\u003eAt 193 x 523 x 110mm, this intercooler outperforms any comparable top mount option for the VB WRX.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eDual entry design.\u003c\/strong\u003e\u003cbr\u003eA unique dual entry configuration ensures optimal airflow distribution across the entire core, resulting in more consistent cooling and improved power output across the rev range.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eAvailable in two finishes.\u003c\/strong\u003e\u003cbr\u003eChoose between a clean raw aluminium or stealth black finish to suit your build.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15-minute installation.\u003c\/strong\u003e\u003cbr\u003eDesigned for a straightforward, bolt-on fit with no cutting or permanent modification required. Most installations are completed in under 15 minutes.\u003cbr\u003eThe definitive top mount intercooler upgrade for your VB WRX build.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Top_Mount_Intercooler_Kit_22_WRX_-_PWTMIC17.pdf?v=1771553791\" target=\"_blank\" rel=\"noopener\"\u003eView Install Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794688790609,"sku":"PWTMIC17","price":1470.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794688823377,"sku":"PWTMIC17B","price":1515.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_0c70b13b-3f30-41ec-85cd-20952d87f161.png?v=1791063863"},{"product_id":"stage-4-intercooler-kit-ford-falcon-fg","title":"Stage 4 Intercooler Kit - Ford Falcon FG","description":"\u003cp\u003eFor the Ford FG Falcon enthusiast chasing extreme power figures, thermal management is the ultimate hurdle. While our Stage 3 core has long been a market leader, the Stage 4 Intercooler Kit is pushes the boundary further. \u003c\/p\u003e\n\u003cp\u003eThis is our most aggressive cooling solution, designed specifically for those looking to extract the absolute highest output from the FG platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Ultimate Core\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Stage 4 kit features the largest and most efficient core we have ever offered for the FG Falcon. Built with a high-performance bar and plate design, it offers a level of thermal mass and surface area that is unmatched in the market.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e: 500 x 425 x 152mm \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThickness\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt a substantial 6 inches deep, this core provides incredible cooling volume, ensuring stable intake air temperatures even under extreme boost pressures and prolonged high-load sessions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLarge-Bore Efficiency\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo accommodate the massive volume of air required for elite power levels, the core features 3.5-inch inlets and outlets, minimizing backpressure and maximizing flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Flow Piping System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo match the capabilities of the Stage 4 core, we have developed a high-volume induction path that eliminates the restrictions found in smaller systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3.5-inch Cold Side Piping\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis oversized piping ensures that the cooled, dense air has a clear, unrestricted path to the engine, supporting maximum throttle response and top-end power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3.0-inch Hot Side Piping\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOptimised to maintain high air velocity from the turbocharger while providing the flow capacity needed for high-kilowatt builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMandrel-Bent Aluminium\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery pipe is mandrel-bent to maintain a constant internal diameter, ensuring smooth, laminar airflow throughout the entire system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Hardware and Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a complete, high-end hardware package designed for reliability under the most demanding conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSilicone Joiners\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit includes heavy-duty, multi-ply silicone connectors engineered to withstand high temperatures and extreme boost levels without expansion or leaking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel Clamps\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe provide premium stainless steel hose clamps to ensure a permanent, corrosion-resistant seal across all connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnd Tanks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe aluminium end tanks are precision-shaped to distribute air across the massive 152mm core depth, ensuring every row of the core is utilized effectively.\u003c\/p\u003e\n\u003cp\u003eThe Process West Stage 4 Kit is the definitive choice for the \"extreme\" Ford FG build. \u003c\/p\u003e\n\u003cp\u003eBy combining a massive 6-inch thick core with a high-flow 3.5-inch induction path, this kit provides the ultimate thermal overhead for world-class horsepower targets.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794689183825,"sku":"PWFGIC04","price":4300.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_12bd40c4-111e-45ef-8cf7-309f317916bb.png?v=1791063885"},{"product_id":"stage-4-intercooler-core-ford-falcon-fg","title":"Stage 4 Intercooler Core - Ford Falcon FG","description":"\u003cp\u003eFor those chasing extreme power levels, the Process West Stage 4 is the next step up from our market-leading Stage 3 core, and the largest, most efficient intercooler core available for the FG Falcon.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCore specifications.\u003c\/strong\u003e\u003cbr\u003eAt 500 x 425 x 152mm, this bar and plate core is built for serious power. 3.5-inch inlet and outlets ensure maximum flow at high boost levels.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRetains air conditioning.\u003c\/strong\u003e\u003cbr\u003eThe air conditioning condenser is fully retained, and a replacement front reinforcement bar is included with the core-only option.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe definitive intercooler upgrade for high-powered FG Falcon builds.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794689216593,"sku":"PWFGIC04-core","price":3030.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_69b41e3e-c848-4862-9369-312560e226c2.png?v=1791063886"},{"product_id":"intercooler-piping-kit-gr-yaris","title":"Intercooler Piping Kit - 2020 - 2024 GR Yaris (Gen 1)","description":"\u003cp\u003e\u003cstrong\u003eIntercooler Piping Kit — 2020–2024 GR Yaris (Gen 1)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDesigned to complement the Process West Intercooler Kit, this upgrade piping kit maximises airflow efficiency across the entire intercooler system.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003cbr\u003e57mm mandrel bent aluminium hot side and 63mm mandrel bent aluminium cold side, complete with a new high-flow cast aluminium elbow to the throttle body.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease note this piping kit is compatible with the Process West Intercooler Kit only.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794689314897,"sku":"PWFMIC09IP","price":1015.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/264.png?v=1791063889"},{"product_id":"intercooler-kit-gr-yaris","title":"Intercooler Kit - 2020 - 2024 GR Yaris (Gen 1)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThis kit is a dedicated cooling solution for owners looking to protect their engine from heat soak during track days or spirited driving. It balances massive cooling capacity with a simple, reliable installation process.\u003c\/p\u003e\n\u003cp\u003eThe Toyota GR Yaris is a performance-bred machine, but its factory cooling system can become a bottleneck when pushing the car to its limits. Our Process West Intercooler Kit is engineered to provide superior thermal management, ensuring your engine maintains peak power even under heavy load.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCore Specifications\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe centerpiece of this kit is the core itself, which is significantly larger than the original equipment. By increasing the surface area and volume, we have created a more effective heat exchanger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e: 500 x 390 x 65mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e: Currently the largest and most efficient core available on the market for the GR Yaris platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBenefit\u003c\/strong\u003e: Provides a massive increase in cooling surface area, leading to lower intake air temperatures (IATs) and more consistent performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGreater Airflow\u003c\/strong\u003e\u003cbr\u003eSize is only half the battle; how the air moves through the unit is just as critical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Flow Cast End Tanks\u003c\/strong\u003e: We utilise precision-cast end tanks rather than folded sheet metal. This design allows for a smoother internal shape, which ensures air is distributed evenly across the entire height and width of the core.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eInstallation and Hardware\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWe believe high-performance upgrades should be straightforward and reliable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM Compatibility\u003c\/strong\u003e: This kit is designed to be a \"bolt-on\" solution. It is fully compatible with the factory intercooler piping, meaning you do not need to source additional hoses or modify your existing plumbing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePremium Fasteners\u003c\/strong\u003e: Every kit includes high-quality stainless steel hose clamps to ensure a secure, leak-free seal that will resist corrosion over time.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794689413201,"sku":"PWFMIC09","price":1765.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_b5d7f9c9-1b1f-4bd3-847e-9c5b637f2ce6.png?v=1791063894"},{"product_id":"front-mount-intercooler-kit-holden-colorado-rg","title":"Front Mount Intercooler Kit - Holden Colorado RG","description":"\u003cp\u003eDesigned not only with market leading performance in mind, OEM level durability is also part of the Terra-Tuff arsenal, offering manufacturer style design and fitment, followed through with industry leading testing and validation.\u003c\/p\u003e\n\u003cp\u003eNotably this intercooler kit will fit all models of Holden Colorado from 2013 onwards including the DPF models.\u003c\/p\u003e\n\u003cp\u003eThis means that when you fit a Process West Intercooler system to your Holden Colorado you have made a choice to have not only the best charge air cooling, resulting in significant power and torque gains, but you have also chosen a product that will last the life of your vehicle no matter what you throw at it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOLDEN COLORADO Process West Design Philosophy and Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeart of the Process West Terra-Tuff Intercooler system is a durable front mounted Bar and Plate intercooler core. All Terra-Tuff intercoolers use Bar and Plate construction due to not only its effective cooling and heat-sink capability, but also because it is the most durable and impact resistant of all intercooler types. This is a huge replacement intercooler core measuring 673 x 200 x 80mm giving a massive increase in cooling surface area as well as overall thickness when compared to original.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSilicon Piping Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Holden Colorado Terra-Tuff intercooler kits comes with the intercooler core and a pair of replacement front silicone intercooler hoses, which is all of the parts that sit behind the grille of the vehicles.\u003c\/p\u003e\n\u003cp\u003eThis means that fitment is incredibly simple requiring only the grille to be removed and the intercooler and piping bolted straight in. For those that want to replace all of the factory hoses with Process West Terra-Tuff parts then we have two different options to suit both DPF and non-DPF models.\u003c\/p\u003e\n\u003cp\u003eThe reason we do this is that each of these models is different in the piping layout. Available at a small additional charge these optional silicon piping kits can be ordered here\u003c\/p\u003e\n\u003cp\u003eAll of our Process West Terra-Tuff piping consists of specifically moulded silicone hoses of four ply construction combined with high-durability constant tension hose-clamps.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794689544273,"sku":"TTFMIC04-","price":1350.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/257.png?v=1791063900"},{"product_id":"front-mount-intercooler-kit-isuzu-dmax-2013-16","title":"Front Mount Intercooler Kit - Isuzu DMAX 2013 - 16","description":"\u003cp\u003eThe Process West Front Mount Intercooler is engineered for Isuzu D-MAX owners who demand both performance and long-term durability. Built to OEM-level fitment standards and validated through industry-leading testing, this is a genuine fit-and-forget upgrade.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCompatible with all D-MAX models from 2013 onwards, including DPF variants.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBar and plate core.\u003c\/strong\u003e\u003cbr\u003eAt the heart of the system is a 673 x 200 x 80mm bar and plate intercooler core — significantly larger than the factory unit in both cooling surface area and overall thickness. Bar and plate construction is chosen specifically for its superior heat dissipation and impact resistance, making it the most durable intercooler type available.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple installation.\u003c\/strong\u003e\u003cbr\u003eThe kit includes the intercooler core and a pair of replacement front silicone hoses — everything that sits behind the grille. Installation requires only grille removal, with the intercooler and piping bolting straight in.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull silicone piping options.\u003c\/strong\u003e\u003cbr\u003eFor those looking to replace all factory hoses, optional Process West silicone piping kits are available for both DPF and non-DPF models. All piping features four-ply moulded silicone construction paired with high-durability constant tension hose clamps.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA performance and durability upgrade built to last the life of your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Front_Mount_Intercooler_Kit_-_Isuzu_DMAX_2013_-_16_-_TTFMIC04.pdf?v=1771556069\" target=\"_blank\" rel=\"noopener\"\u003eView Install Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794689577041,"sku":"TTFMIC04","price":1350.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/256.png?v=1791063902"},{"product_id":"front-mount-intercooler-kit-toyota-n80-hilux-2016-23","title":"Front Mount Intercooler Kit - Toyota N80 Hilux 2016-20","description":"\u003cp\u003eDesigned not only with market leading performance in mind, OEM level durability is also part of the TERRATUFF arsenal, offering manufacturer style design and fitment, followed through with industry leading testing and validation.\u003c\/p\u003e\n\u003cp\u003eThis means that when you fit a Process West Intercooler system to your N80 Hilux you have made a choice to have not only the best charge air cooling, resulting in significant power and torque gains, but you have also chosen a product that will last the life of your vehicle no matter what you throw at it. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eN80 Hilux Process West Design Philosophy AND Parts\u003c\/strong\u003e\u003cbr\u003eHeart of the Process West Intercooler system is a durable front mounted Bar and Plate intercooler core.\u003c\/p\u003e\n\u003cp\u003eAll intercoolers use Bar and Plate construction due to not only its effective cooling and heat-sink capability, but also because it is the most durable and impact resistant of all intercooler types. Measuring in at 590m x 230mm x 78mm the N80 Hilux core also offers a massive increase in cooling surface area as well as overall thickness.\u003c\/p\u003e\n\u003cp\u003eThe traditional bug-bear of intercooler upgrades – piping integrity – has also been addressed with the Process West system.\u003c\/p\u003e\n\u003cp\u003eSpecifically moulded silicone hoses of four ply construction are utilised throughout, and when combined with high-durability constant tension hose-clamps, tying to the mandrel bent aluminium pipe-work, the result is of factory quality and dependability.\u003c\/p\u003e\n\u003cp\u003eA final (and important) part of the TERRATUFF design is the use of isometric rubber mounts for the intercooler core. This means that in extreme conditions – such as demanding off road use – that the intercooler itself can flex its mounts with the rest of the vehicle and relieve strain on the mountings and pipe-work. The long term effect of this is no cracked mounting brackets and reduced likelihood of ever failing a hose connection.\u003c\/p\u003e\n\u003cp\u003eAs you can see by now the Process West TERRATUFF intercooler solution is a serious product for long-term serious application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRanger\/BT50 Process West Testing\u003c\/strong\u003e\u003cbr\u003eThere is no point in putting a vehicle on the dyno to try and show the effects of intercooling on performance.\u003c\/p\u003e\n\u003cp\u003eWhile there might be a little torque or power gain, the job of the TERRATUFF intercooler upgrade is to work in real-world conditions without the assistance of a climate controlled dyno room and the cooler itself fed with artificial airflow from a fan. This might convince some to buy intercooler upgrades, but it doesn’t really tell you how, or even if, they work.\u003c\/p\u003e\n\u003cp\u003eInstead the Process West engineers took a different approach to validate the TERRATUFF design. Real world simulation rather than a dyno run was decided on, and with that in mind the team put together a test rig for our development Ranger to show the precise and measured result of fitting a Process West TERRATUFF intercooler upgrade. The schedule for this testing is laid out below –\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eN80 Hilux is loaded with 650kg of concrete blocks in the tray\u003c\/strong\u003e\u003cbr\u003eA standardised 4km uphill run with an elevation of 310m (nearly 8% avg grade)\u003cbr\u003eHold 80km\/h road speed using Cruise Control (with only a small traffic speed variance)\u003cbr\u003eUse our racetrack developed AIM datalogging system to measure all of the pertinent data points to ensure the data for complete cooling effectiveness is generated.\u003c\/p\u003e\n\u003cp\u003eThis test procedure was carried out back to back with both factory and Process West TERRATUFF intercoolers on the same day in the same ambient conditions.\u003c\/p\u003e\n\u003cp\u003eLooking at the datalogging shows that the factory intercooler peaked at 39C (with a faster rise to temperature) than the Process West TERRATUFF intercooler system which peaked at just 24C. That’s a massive 38% improvement over stock cooling with Process West TERRATUFF.\u003c\/p\u003e\n\u003cp\u003eThe gains this shows are three-fold with not only hikes in Torque and Power you can feel through the seat of the pants, but there is also the flow on effect of reduced EGT figures to help the engine live a longer and happier life.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794690330705,"sku":"TTFMIC03","price":1775.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/238.png?v=1791063935"},{"product_id":"front-mount-intercooler-kit-ford-px-px2-ranger-and-mazda-bt50","title":"Front Mount Intercooler Kit - Ford PX\/PX2 Ranger and Mazda BT50","description":"\u003cp\u003e\u003cstrong\u003eFront Mount Intercooler Kit — Ford Ranger PX1\/PX2 \u0026amp; Mazda BT50 3.2\u003c\/strong\u003e\u003cbr\u003eThe Process West Front Mount Intercooler is built for Ranger and BT50 owners who demand real-world performance and long-term durability. Engineered to OEM-level fitment standards and validated through rigorous real-world testing, this is a serious upgrade for serious use.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBar and plate core.\u003c\/strong\u003e\u003cbr\u003eThe 700 x 247 x 75mm bar and plate core delivers a significant increase in cooling surface area and overall thickness over the factory unit. Bar and plate construction is chosen for its superior heat dissipation, durability, and impact resistance — the toughest intercooler type available.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eProven real-world results.\u003c\/strong\u003e\u003cbr\u003eProcess West engineers tested the intercooler against the factory intercooler under identical real-world conditions — a loaded Ranger carrying 650kg up a 4km, 310m elevation climb at 80km\/h. The factory intercooler peaked at 49°C. The Terra-Tuff peaked at just 28°C. That's a 43% improvement in cooling efficiency, translating to real gains in power, torque, and engine longevity through reduced EGT figures.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePiping built to last.\u003c\/strong\u003e\u003cbr\u003eFour-ply moulded silicone hoses, high-durability constant tension hose clamps, and mandrel bent aluminium pipework combine for factory-level integrity across the entire system.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIsometric rubber mounts.\u003c\/strong\u003e\u003cbr\u003eThe intercooler core is mounted on isometric rubber mounts, allowing it to flex with the vehicle under demanding off-road conditions. This reduces strain on mounting brackets and hose connections for a longer service life.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe definitive intercooler upgrade for your Ranger or BT50 build.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794690461777,"sku":"TTFMIC01","price":1775.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/237.png?v=1791063936"},{"product_id":"front-mount-intercooler-kit-toyota-hilux-n70","title":"Front Mount Intercooler Kit - Toyota Hilux N70","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eFront Mount Intercooler Kit — Toyota Hilux N70\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Front Mount Intercooler is built for N70 Hilux owners who demand real-world performance and long-term durability. Engineered to OEM-level fitment standards and validated through rigorous real-world testing, this is a serious upgrade for serious use.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eBar and plate core.\u003c\/strong\u003e The 550 x 265 x 65mm bar and plate core delivers a significant increase in cooling surface area and overall thickness over the factory unit. Bar and plate construction is chosen for its superior heat dissipation, durability, and impact resistance — the toughest intercooler type available.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eProven real-world results.\u003c\/strong\u003e Process West engineers tested the Terra-Tuff against the factory intercooler under identical real-world conditions — a loaded N70 carrying 650kg up a 4km, 310m elevation climb at 80km\/h. The factory intercooler peaked at 44°C. The Terra-Tuff peaked at just 23°C. That's a 48% improvement in cooling efficiency, translating to real gains in power, torque, and engine longevity through reduced EGT figures.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003ePiping built to last.\u003c\/strong\u003e Four-ply moulded silicone hoses, high-durability constant tension hose clamps, and mandrel bent aluminium pipework combine for factory-level integrity across the entire system.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eIsometric rubber mounts.\u003c\/strong\u003e The intercooler core is mounted on isometric rubber mounts, allowing it to flex with the vehicle under demanding off-road conditions. This reduces strain on mounting brackets and hose connections for a longer service life.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe definitive intercooler upgrade for your N70 Hilux build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0962\/0570\/1399\/files\/Front_Mount_Intercooler_Kit_-_Toyota_Hilux_N70_-_TTFMIC02_1.pdf?v=1771556157\" target=\"_blank\" rel=\"noopener\"\u003eView Install Guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794690494545,"sku":"TTFMIC02","price":1775.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/236.png?v=1791063938"},{"product_id":"intercooler-upgrade-ford-focus-st","title":"Intercooler Upgrade - Ford Focus ST","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Intercooler Upgrade for the Ford Focus ST is the result of exhaustive design, engineering, and real-world validation — developed specifically to unlock the full potential of the EcoBoost engine.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eEngineered from data.\u003c\/strong\u003e Early datalogging of the tuned factory ECU revealed clear limitations in the factory hardware. It became evident that getting the best from the Focus ST required carefully developed hardware working alongside the latest aftermarket tuning — not software alone.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eBigger core, better cooling.\u003c\/strong\u003e At 550 x 390 x 65mm, the intercooler core maximises cooling surface area without sacrificing flow. Low-restriction end tanks and a highly finned open core design ensure exceptional airflow and cooling capacity, with enough headroom to support even the most ambitious power targets.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eComplete kit.\u003c\/strong\u003e Includes matched 63mm intercooler piping, Process West silicone hoses, and high-durability hose clamps for a fully integrated, factory-quality finish.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA complete cooling solution for the serious Focus ST build.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794690756689,"sku":"PWFMIC05","price":1785.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794690789457,"sku":"PWFMIC05B","price":1785.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/212.png?v=1791063947"},{"product_id":"stage-3-intercooler-core-ford-falcon-fg","title":"Stage 3 Intercooler Core - Ford Falcon FG","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eStage 3 Front Mount Intercooler Core — Ford Falcon FG\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Stage 3 is the largest and most efficient front mount intercooler core available for the Ford Falcon FG (besides our Stage 4), and a proven foundation for any serious performance build.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eMassive core, serious cooling.\u003c\/strong\u003e At 500 x 425 x 100mm, this bar and plate core offers a significant increase in cooling surface area and overall volume compared to the factory unit. More core means lower intake air temperatures, and lower intake air temperatures mean more consistent power, improved throttle response, and a safer tune with greater detonation resistance.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eBar and plate construction.\u003c\/strong\u003e Bar and plate cores are chosen for their superior heat dissipation and heat soak resistance over tube and fin alternatives. Under sustained hard driving, the Stage 3 continues to perform where lesser cores fall short.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eSupports serious power levels.\u003c\/strong\u003e The generous core dimensions and smooth internal flow path give this intercooler the capacity to support the horsepower goals of even the most demanding FG Falcon builds, from street-driven performance cars through to dedicated track and drag applications.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eFinish options.\u003c\/strong\u003e Available in black powder coat or silver\/raw finish to suit your build.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe definitive intercooler core upgrade for the Ford Falcon FG.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794691313745,"sku":"PWFG03-core","price":2180.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794691346513,"sku":"PWFG03B-core","price":2250.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/200.png?v=1791063963"},{"product_id":"stage-2-intercooler-core-ford-falcon-fg","title":"Stage 2 Intercooler Core - Ford Falcon FG","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eStage 2 Front Mount Intercooler Core — Ford Falcon FG\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Stage 2 is a significant step up from the factory intercooler for the Ford Falcon FG, delivering improved charge air cooling and a solid foundation for mid-to-high level performance builds.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eSubstantial core, improved cooling.\u003c\/strong\u003e At 420 x 410 x 90mm, this bar and plate core offers a meaningful increase in cooling surface area and overall volume over the factory unit. Lower intake air temperatures translate to more consistent power, improved throttle response, and greater detonation resistance under hard driving.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eBar and plate construction.\u003c\/strong\u003e Bar and plate cores are chosen for their superior heat dissipation and heat soak resistance over tube and fin alternatives. Under sustained hard driving, the Stage 2 continues to perform where the factory core falls short.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eSupports mid-to-high power levels.\u003c\/strong\u003e The Stage 2 core is well suited to modified FG Falcon builds running increased boost and power, offering genuine cooling capacity for street and occasional track use without stepping up to the full Stage 3 dimensions.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eFinish options.\u003c\/strong\u003e Available in black powder coat or silver finish to suit your build.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA proven intercooler core upgrade for the Ford Falcon FG.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794691379281,"sku":"PWFG02-core","price":1720.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794691412049,"sku":"PWFG02B-core","price":1800.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/198.png?v=1791063965"},{"product_id":"stage-1-intercooler-core-ford-falcon-fg","title":"Stage 1 Intercooler Core - Ford Falcon FG","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eStage 1 Front Mount Intercooler Core — Ford Falcon FG\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Stage 1 is the ideal entry point for FG Falcon owners looking to move beyond the factory intercooler. Featuring a unique stepped core design engineered specifically for the FG platform, it delivers genuine cooling improvement with a straightforward, no-cut installation.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eStepped core design.\u003c\/strong\u003e The Stage 1 uses a two-section stepped bar and plate core — a 396 x 272 x 90mm bottom section paired with a 396 x 135 x 62mm top section. This design maximises the available space in the engine bay while maintaining smooth airflow and effective charge air cooling throughout.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eBar and plate construction.\u003c\/strong\u003e Bar and plate cores are chosen for their superior heat dissipation and heat soak resistance over tube and fin alternatives. Under sustained hard driving, the Stage 1 continues to perform where the factory core falls short.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eZero cutting required.\u003c\/strong\u003e Installation is straightforward with no cutting or permanent modification needed, making the Stage 1 an accessible upgrade for FG Falcon owners at any level of experience.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eFinish options.\u003c\/strong\u003e Available in black powdercoat or silver finish to suit your build.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA clean, effective intercooler core upgrade for the Ford Falcon FG.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794691706961,"sku":"PWFGIC01-core","price":1720.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794691739729,"sku":"PWFGIC01B-core","price":1800.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/196.png?v=1791063966"},{"product_id":"stage-3-intercooler-kit-ford-falcon-fg","title":"Stage 3 Intercooler Kit - Ford Falcon FG","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eStage 3 Intercooler Upgrade Kit — Ford Falcon FG\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Stage 3 Intercooler Upgrade Kit brings the proven performance of our BA\/BF Stage 3 core to the FG platform, with revised end tanks engineered specifically for the FG engine bay. This is the largest and most efficient complete intercooler kit available for the FG Falcon.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eMassive core, serious cooling.\u003c\/strong\u003e At 500 x 425 x 100mm, this bar and plate core delivers a substantial increase in cooling surface area and volume over the factory unit. Lower intake air temperatures mean more consistent power, improved throttle response, and greater detonation resistance under hard driving.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eComplete piping kit.\u003c\/strong\u003e Includes 2.5-inch hot side intercooler piping and 3-inch cold side intercooler piping, complete with a new 3-inch high-flow cast elbow at the throttle body for maximum flow from core to engine.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eFlexible intake compatibility.\u003c\/strong\u003e Compatible with both the Process West 4-inch Race Air Box and the factory air intake system, making it a straightforward upgrade regardless of your current intake setup.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe definitive intercooler upgrade for the serious FG Falcon build.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794691772497,"sku":"PWFGIC03","price":3245.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794691805265,"sku":"PWFGIC03B","price":3310.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/194.png?v=1791063968"},{"product_id":"stage-2-intercooler-piping-kit-ford-falcon-fg","title":"Stage 2 Intercooler Piping Kit - Ford Falcon FG","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Stage 2 Piping Kit delivers superior airflow performance for the Ford Falcon FG, featuring mandrel bent aluminium piping throughout for smooth, unrestricted flow between the intercooler and engine.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eComplete kit.\u003c\/strong\u003e All necessary silicone joiners and stainless steel hose clamps are included for a clean, integrated installation.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eCompatibility.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"overflow-x-auto w-full px-2 mb-6\"\u003e\n\u003ctable class=\"min-w-full border-collapse text-sm leading-[1.7] whitespace-normal\"\u003e\n\u003cthead class=\"text-left\"\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003e\u003cstrong\u003eIntercooler.\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003e\u003cstrong\u003ePart Number.\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eStock \/ Factory Intercooler Core\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eProcess West Stage 1 Intercooler Core\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003ePWFGIC01-core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eProcess West Stage 2 Intercooler Core\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003ePWFG02-core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794691838033,"sku":"PWFGIC02-hose","price":730.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/193.png?v=1791063971"},{"product_id":"stage-2-intercooler-kit-ford-falcon-fg","title":"Stage 2 Intercooler Kit - Ford Falcon FG","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Stage 2 Front Mount Intercooler Kit is a complete cooling upgrade for the Ford Falcon FG, combining a high-performance core with everything needed for a clean, integrated installation.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eCore specifications.\u003c\/strong\u003e The 420 x 410 x 90mm bar and plate core features high-flow polished aluminium end tanks, delivering smooth airflow and effective charge air cooling with a meaningful increase in capacity over the factory unit.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eComplete kit.\u003c\/strong\u003e Mandrel bent aluminium piping, all necessary silicone joiners, and stainless steel hose clamps are included for a fully integrated, factory-quality finish.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eFinish options.\u003c\/strong\u003e The intercooler core is available in black powdercoat or silver finish to suit your build.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA proven cooling upgrade for the serious FG Falcon build.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794691870801,"sku":"PWFGIC02","price":2390.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794691903569,"sku":"PWFGIC02B","price":2470.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/191_d7ad5171-0aaa-4bdb-b65a-a587d4d566b3.png?v=1791063975"},{"product_id":"stage-1-intercooler-kit-stepped-core-ford-falcon-fg","title":"Stage 1 Intercooler Kit (Stepped Core) - Ford Falcon FG","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Stage 1 Front Mount Intercooler Kit is a complete cooling upgrade for the Ford Falcon FG, built around a unique stepped core design engineered specifically for the FG engine bay.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eStepped core design.\u003c\/strong\u003e The Stage 1 uses a two-section stepped bar and plate core — a 396 x 272 x 90mm bottom section paired with a 396 x 135 x 62mm top section. This design maximises the available space in the engine bay while maintaining smooth airflow and effective charge air cooling throughout.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eZero cutting required.\u003c\/strong\u003e Installation is straightforward with no cutting or permanent modification needed, making this an accessible upgrade for FG Falcon owners at any level of experience.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eComplete kit.\u003c\/strong\u003e Mandrel bent aluminium piping, all necessary silicone joiners, and stainless steel hose clamps are included for a fully integrated, factory-quality finish.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eFinish options.\u003c\/strong\u003e The intercooler core is available in black powdercoat or silver finish to suit your build.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA clean, complete intercooler upgrade for the Ford Falcon FG.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794691969105,"sku":"PWFGIC01","price":2390.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794692001873,"sku":"PWFGIC01B","price":2470.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/1_c6ab161b-ea29-410e-8522-4b9317ac2d78.png?v=1791063976"},{"product_id":"hot-side-intercooler-piping-ford-falcon-ba-bf","title":"Hot Side intercooler Piping - Ford Falcon BA\/BF","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Hot Side Intercooler Piping Kit eliminates the restrictions of the factory hot side piping, delivering a more direct and smoother airflow path between the turbo and intercooler.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe larger, higher-flow design reduces restriction across the system, resulting in improved throttle response, reduced turbo lag, and a noticeable gain in power over the factory setup.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA simple, effective upgrade for any BA\/BF Falcon build.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794692853841,"sku":"PWBAIP02","price":450.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/161.png?v=1791063997"},{"product_id":"crossover-pipe-kit-ford-falcon-ba-bf","title":"Crossover Pipe Kit - Ford Falcon BA\/BF","description":"\u003cp\u003eThis crossover pipe kit will work alongside the Process West Stage 2 Intercooler Kit and Under Battery Cold Air Intake.\u003c\/p\u003e\n\u003cp\u003eThe upgrade crossover provides two primary benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces the restrictive factory cross over pipe\u003c\/li\u003e\n\u003cli\u003eAllows fitting of the Process West Under Battery Cold Air Intake\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe kit provides the opportunity to upgrade to the Stage 2 Intercooler Kit, Cold Air Intake, and Crossover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: This unit is as large as possible, however maintains a 10mm clearance to the bonnet\/hood. This could not have been achieved with bent aluminium tubes without resulting in a very awkward looking pipe.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794692886609,"sku":"PWBAIP01","price":480.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/160.png?v=1791064000"},{"product_id":"stage-3-intercooler-core-ford-falcon-ba-bf","title":"Stage 3 Intercooler Core - Ford Falcon BA\/BF","description":"\u003cp data-path-to-node=\"1\"\u003e\u003cspan class=\"\"\u003eFor the Ford BA\/BF Falcon enthusiast pushing the absolute limits of the chassis,\u003c\/span\u003e\u003cspan class=\"\"\u003e thermal management is the difference between consistent power and engine-saving timing pull.\u003c\/span\u003e\u003cspan class=\"\"\u003e The Process West Stage 3 Intercooler Core is engineered specifically for high-horsepower builds that demand maximum cooling capacity without compromising airflow.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"4\"\u003e\u003cspan class=\"\"\u003eThe Stage 3 core represents a massive jump in cooling volume.\u003c\/span\u003e\u003cspan class=\"\"\u003e Aside from our flagship Stage 4 unit,\u003c\/span\u003e\u003cspan class=\"\"\u003e this is the largest and most efficient intercooler available for the BA\/BF platform today.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"5,0,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"5,0,0\"\u003eDimensions:\u003c\/b\u003e\u003cspan class=\"\"\u003e \u003c\/span\u003e\u003cspan data-index-in-node=\"12\" data-math=\"500 \\times 425 \\times 100\\text{mm}\" class=\"math-inline\"\u003e500mmm  425mm 100mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"5,1,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"5,1,0\"\u003e100mm Thickness\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"5,1,0\"\u003e\u003cspan class=\"\"\u003eThe substantial 100mm depth provides an enormous thermal mass,\u003c\/span\u003e\u003cspan class=\"\"\u003e allowing the core to remain effective even during prolonged high-boost sessions or competitive use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"5,2,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"5,2,0\"\u003eBar and Plate Construction\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"5,2,0\"\u003e\u003cspan class=\"\"\u003eWe utilise a premium bar and plate design,\u003c\/span\u003e\u003cspan class=\"\"\u003e chosen for its durability and its superior ability to dissipate heat rapidly compared to standard tube-and-fin alternatives.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"7\"\u003e\u003cstrong\u003eMax Airflow\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"7\"\u003e\u003cspan class=\"\"\u003eA core of this size requires precise air distribution to function effectively.\u003c\/span\u003e\u003cspan class=\"\"\u003e We have focused on the internal dynamics to ensure the charge air is cooled evenly as it passes through the unit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"9,0,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"9,0,0\"\u003eHigh-Flow Cast End Tanks\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"9,0,0\"\u003e\u003cspan class=\"\"\u003eThe aluminium end tanks are shaped to direct air across the entire internal surface area.\u003c\/span\u003e\u003cspan class=\"\"\u003e This prevents \"hot spots\" and ensures that every millimetre of the 425mm height is utilised for cooling.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"9,1,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"9,1,0\"\u003eEfficiency at Scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"9,1,0\"\u003e\u003cspan class=\"\"\u003eDespite its massive size,\u003c\/span\u003e\u003cspan class=\"\"\u003e the internal core geometry is optimised to maintain low pressure drop,\u003c\/span\u003e\u003cspan class=\"\"\u003e ensuring your turbocharger doesn't have to work harder to move air through the system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 data-path-to-node=\"11\"\u003ePerformance Application\u003c\/h4\u003e\n\u003cp data-path-to-node=\"12\"\u003e\u003cspan class=\"\"\u003eThe Stage 3 core is designed for vehicles that have moved well beyond basic bolt-on modifications.\u003c\/span\u003e\u003cspan class=\"\"\u003e It is the ideal choice for owners targeting high-kilowatt figures who require a cooling solution that will not \"heat soak\" after a single pass or spirited run.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"13,0,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"13,0,0\"\u003eVehicle Compatibility:\u003c\/b\u003e\u003cspan class=\"\"\u003e Fits all 2002–2007 Ford Falcon BA\/BF models.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"13,1,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13,1,0\"\u003eSystem Integration\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"13,1,0\"\u003e\u003cspan\u003eThis core is designed to be the centerpiece of a high-flow induction system,\u003c\/span\u003e\u003cspan\u003e providing the densest,\u003c\/span\u003e\u003cspan\u003e coolest air charge possible to the engine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan class=\"\"\u003e\u003cspan\u003eIf you are building a high-power BA\/BF Falcon and need a cooling solution that offers maximum surface area and depth,\u003c\/span\u003e\u003cspan\u003e the Stage 3 core is the professional choice.\u003c\/span\u003e\u003cspan\u003e It balances massive cooling potential with the high-end fit and finish Process West is known for.\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794692919377,"sku":"PWBA03-core","price":2060.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794692952145,"sku":"PWBA03B-core","price":2180.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/158.png?v=1791064001"},{"product_id":"stage-2-intercooler-core-ford-falcon-ba-bf","title":"Stage 2 Intercooler Core - Ford Falcon BA\/BF","description":"\u003cp\u003eThe Ford Falcon BA\/BF platform is renowned for its tuning potential, but as boost levels increase, so does the demand for effective heat dissipation.\u003c\/p\u003e\n\u003cp\u003eThe Process West Stage 2 Intercooler Core is designed as a high-performance upgrade for owners looking to move beyond the limitations of the factory cooling system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCore Construction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Stage 2 kit utilises a rugged bar and plate design.\u003c\/p\u003e\n\u003cp\u003eThis construction is favored for high-performance street and track applications due to its ability to soak up and dissipate heat rapidly while remaining durable against road debris.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e: 500 x 360 x 80mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThermal Mass\u003c\/strong\u003e: The 80mm thickness provides a substantial increase in volume over standard units, allowing for much higher power levels before heat soak becomes an issue.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEfficiency\u003c\/strong\u003e: Designed to maintain low pressure drop, ensuring that the increase in cooling doesn't come at the expense of throttle response.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance Application\u003c\/strong\u003e\u003cbr\u003eWhile the Stage 1 core is excellent for mild upgrades, the Stage 2 is the preferred choice for enthusiasts aiming for higher horsepower targets. It provides the necessary thermal headroom to keep intake temperatures stable during repeated hard acceleration or sustained high-speed driving.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Due to the increased dimensions of the Stage 2 core, this unit is typically used in conjunction with upgraded piping kits to ensure maximum flow and reliable fitment.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794692984913,"sku":"PWBA02-core","price":1650.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794693017681,"sku":"PWBA02B-core","price":1720.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/156_1a4cd162-ad7f-46e9-887c-c50d3c111ebe.png?v=1791064003"},{"product_id":"stage-3-intercooler-upgrade-kit-ford-falcon-ba-bf","title":"Stage 3 Intercooler Upgrade Kit - Ford Falcon BA\/BF","description":"\u003cp data-path-to-node=\"1\"\u003e\u003cspan class=\"\"\u003eThe \u003c\/span\u003eProcess West Stage 3 Intercooler Upgrade Kit\u003cspan class=\"\"\u003e is engineered for high-horsepower Ford BA\/BF Falcons (2002–2007) that require the absolute maximum in thermal management.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"1\"\u003e\u003cspan class=\"\"\u003eAside from our flagship Stage 4,\u003c\/span\u003e\u003cspan class=\"\"\u003e this is the largest and most efficient cooling solution available for the Falcon platform,\u003c\/span\u003e\u003cspan class=\"\"\u003e designed to support elite power levels while maintaining rock-solid intake temperatures.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"3\"\u003e\u003cstrong\u003eCore Dimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"4\"\u003e\u003cspan class=\"\"\u003eAt the heart of this kit is a massive \u003c\/span\u003e\u003cb class=\"\" data-index-in-node=\"38\" data-path-to-node=\"4\"\u003ebar and plate\u003c\/b\u003e\u003cspan class=\"\"\u003e intercooler core,\u003c\/span\u003e\u003cspan class=\"\"\u003e built to handle extreme boost pressures and high-volume airflow without heat soaking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"5\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"5,0,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"5,0,0\"\u003eDimensions:\u003c\/b\u003e\u003cspan class=\"\"\u003e \u003c\/span\u003e\u003cspan data-index-in-node=\"12\" data-math=\"500 \\times 425 \\times 100\\text{mm}\" class=\"math-inline\"\u003e500 x 425 x 100mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"5,1,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"5,1,0\"\u003eMassive Thermal Capacity:\u003c\/b\u003e\u003cspan class=\"\"\u003e With a 100mm thickness,\u003c\/span\u003e\u003cspan class=\"\"\u003e this core provides an enormous surface area for heat exchange,\u003c\/span\u003e\u003cspan class=\"\"\u003e ensuring your engine receives the densest,\u003c\/span\u003e\u003cspan class=\"\"\u003e coolest air charge possible.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"5,2,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"5,2,0\"\u003eHigh-Flow Cast Tanks:\u003c\/b\u003e\u003cspan class=\"\"\u003e The aluminium end tanks are shaped to distribute air evenly across the entire 425mm height of the core,\u003c\/span\u003e\u003cspan class=\"\"\u003e eliminating \"dead spots\" and maximising cooling efficiency.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"7\"\u003e\u003cstrong\u003eHigh-Flow Piping\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"7\"\u003e\u003cspan class=\"\"\u003eTo complement the massive core,\u003c\/span\u003e\u003cspan class=\"\"\u003e we have redesigned the entire charge-air path using mandrel-bent aluminium piping.\u003c\/span\u003e\u003cspan class=\"\"\u003e This ensures a constant internal diameter for smooth,\u003c\/span\u003e\u003cspan class=\"\"\u003e laminar airflow.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"9,0,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"9,0,0\"\u003eStaged Piping Diameters\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"9,0,0\"\u003e\u003cspan class=\"\"\u003eThe kit features \u003c\/span\u003e\u003cb class=\"\" data-index-in-node=\"42\" data-path-to-node=\"9,0,0\"\u003e2.5-inch hot-side piping\u003c\/b\u003e\u003cspan class=\"\"\u003e to maintain air velocity from the turbo,\u003c\/span\u003e\u003cspan class=\"\"\u003e stepping up to \u003c\/span\u003e\u003cb class=\"\" data-index-in-node=\"123\" data-path-to-node=\"9,0,0\"\u003e3-inch cold-side piping\u003c\/b\u003e\u003cspan class=\"\"\u003e to provide high-volume flow to the engine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"9,1,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"9,1,0\"\u003eThrottle Body Relocation\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"9,1,0\"\u003e\u003cspan class=\"\"\u003eA standout feature of the Stage 3 kit is our unique throttle body relocation.\u003c\/span\u003e\u003cspan class=\"\"\u003e This optimizes the intake path,\u003c\/span\u003e\u003cspan class=\"\"\u003e significantly reducing the overall length of the piping for sharper throttle response and improved engine bay aesthetics.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"11\"\u003e\u003cstrong\u003eComprehensive Installation Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"12\"\u003e\u003cspan class=\"\"\u003eThis is a complete,\u003c\/span\u003e\u003cspan class=\"\"\u003e professional-grade hardware solution.\u003c\/span\u003e\u003cspan class=\"\"\u003e We provide every component necessary to install and secure the system for long-term reliability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"13,0,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"13,0,0\"\u003eMulti-Ply Silicone Joiners\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"13,0,0\"\u003e\u003cspan class=\"\"\u003eHigh-grade silicone connectors are included to withstand extreme temperatures and high boost pressures without expansion or failure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"13,1,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13,1,0\"\u003eStainless Steel Clamps\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"13,1,0\"\u003e\u003cspan\u003eThe system is secured with heavy-duty stainless steel hose clamps,\u003c\/span\u003e\u003cspan\u003e ensuring a permanent,\u003c\/span\u003e\u003cspan\u003e leak-free seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"13,2,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"13,2,0\"\u003eMandrel Bends\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"13,2,0\"\u003e\u003cspan\u003eAll aluminium piping is mandrel bent to prevent the flow restrictions common with standard pipe-bending techniques.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"15\"\u003e\u003cspan\u003eThe Stage 3 Upgrade Kit is the definitive choice for BA\/BF owners pushing for serious power figures.\u003c\/span\u003e\u003cspan\u003e By combining our massive 100mm core with a specialized throttle body relocation and optimised piping,\u003c\/span\u003e\u003cspan\u003e this kit provides the ultimate balance of cooling capacity and flow efficiency.\u003c\/span\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794693050449,"sku":"PWBAIC03","price":3180.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794693083217,"sku":"PWBAIC03B","price":3265.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/154.png?v=1791064004"},{"product_id":"stage-2-intercooler-upgrade-kit-ford-falcon-ba-bf","title":"Stage 2 Intercooler Upgrade Kit - Ford Falcon BA\/BF","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe Process West Stage 2 Kit is the definitive choice for BA\/BF owners moving beyond basic modifications. It combines a high-volume core with optimised piping to ensure your engine receives a steady supply of cool, dense air.\u003cbr\u003e\u003cbr\u003eThe Ford BA\/BF Falcon is a powerhouse platform, but as power levels rise, so does the heat generated by the turbocharger. The Process West Stage 2 Intercooler Upgrade Kit is a comprehensive solution designed to provide the thermal headroom necessary for high-performance street and track applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Efficiency Core Design\u003c\/strong\u003e\u003cbr\u003eThe heart of this kit is a substantial bar and plate intercooler core. This design is chosen for its superior thermal mass, allowing it to soak up and dissipate heat rapidly during high-boost scenarios.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e: 500 x 360 x 80mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Area\u003c\/strong\u003e: The 80mm thickness offers a massive increase in cooling volume compared to factory units, preventing the \"heat soak\" that often kills power during spirited driving.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCast End Tanks\u003c\/strong\u003e: The core features high-flow aluminium end tanks. These are shaped to ensure air is distributed evenly across the internal cooling rows, maximizing every millimeter of the core’s surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Plumbing\u003c\/strong\u003e\u003cbr\u003eCooling the air is only half the job; getting it to the engine efficiently is the other. This kit replaces restrictive factory rubber hoses with a dedicated piping solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMandrel Bent Aluminium\u003c\/strong\u003e: Our piping is mandrel bent to ensure a constant internal diameter. This eliminates the turbulence and restrictions found in traditional \"crush-bent\" pipes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved Throttle Response\u003c\/strong\u003e: By smoothing out the air path and using rigid aluminium, the system reduces expansion under boost, leading to more immediate throttle response.\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eInstallation and Reliability\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eThis is a complete \"turn-key\" hardware kit. We provide everything required to secure the system and ensure it performs reliably under high pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReinforced Silicone Joiners\u003c\/strong\u003e: The kit includes high-grade silicone connectors designed to withstand high temperatures and significant boost levels without leaking or bursting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel Clamps\u003c\/strong\u003e: Every connection is secured with heavy-duty stainless steel hose clamps for a permanent, corrosion-resistant seal.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Silver","offer_id":62794693115985,"sku":"PWBAIC02","price":2040.0,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":62794693148753,"sku":"PWBAIC02B","price":2120.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/152.png?v=1791064006"},{"product_id":"hood-scoop-splitter-subaru-04-07-forester-xt-w-02-sti-hood-scoop","title":"Hood Scoop Splitter - Subaru 04-07 Forester XT w\/ 02 STI Hood Scoop","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eOne of the most overlooked steps when upgrading a Subaru intercooler is fitting a correctly sized hood scoop splitter. Without it, even the best intercooler upgrade will fall short of its potential.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA larger intercooler core increases cooling surface area, but if the factory splitter remains in place it restricts airflow to the new core. Remove the splitter entirely and the problem reverses — air flows around the intercooler rather than through it, causing heat soak and rising intake air temperatures that directly reduce power.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Hood Scoop Splitter solves both problems. Designed specifically for the Process West Top Mount Intercooler, it forms a complete seal around the core, forcing cooling air through the intercooler and maximising charge air cooling efficiency.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe right finish to any Forester XT intercooler upgrade.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794696130641,"sku":"PWSP07","price":370.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/104.png?v=1791064051"},{"product_id":"hood-scoop-splitter-subaru-04-07-forester-xt-w-stock-hood-scoop","title":"Hood Scoop Splitter - Subaru 04-07 Forester XT w\/ Stock Hood Scoop","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eOne of the most overlooked steps when upgrading a Subaru intercooler is fitting a correctly sized hood scoop splitter. Without it, even the best intercooler upgrade will fall short of its potential.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA larger intercooler core increases cooling surface area, but if the factory splitter remains in place it restricts airflow to the new core. Remove the splitter entirely and the problem reverses — air flows around the intercooler rather than through it, causing heat soak and rising intake air temperatures that directly reduce power.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Hood Scoop Splitter solves both problems. Designed specifically for the Process West Top Mount Intercooler and the stock Forester XT hood scoop, it forms a complete seal around the core, forcing cooling air through the intercooler and maximising charge air cooling efficiency.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe right finish to any Forester XT intercooler upgrade.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794696163409,"sku":"PWSP06","price":370.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/103.png?v=1791064054"},{"product_id":"hood-scoop-splitter-subaru-03-05-sti","title":"Hood Scoop Splitter - Subaru 03-05 STI","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eOne of the most overlooked steps when upgrading a Subaru intercooler is fitting a correctly sized hood scoop splitter. Without it, even the best intercooler upgrade will fall short of its potential.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA larger intercooler core increases cooling surface area, but if the factory splitter remains in place it restricts airflow to the new core. Remove the splitter entirely and the problem reverses — air flows around the intercooler rather than through it, causing heat soak and rising intake air temperatures that directly reduce power.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Process West Hood Scoop Splitter solves both problems. Designed specifically for the Process West Top Mount Intercooler and the 2003–05 STI hood scoop, it forms a complete seal around the core, forcing cooling air through the intercooler and maximising charge air cooling efficiency.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe right finish to any 2003–05 STI intercooler upgrade.\u003c\/p\u003e","brand":"Process West","offers":[{"title":"Default Title","offer_id":62794696228945,"sku":"PWSP05","price":370.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2115\/6365\/files\/102.png?v=1791064054"}],"url":"https:\/\/longboostperformance.com\/collections\/process-west-intercoolers.oembed","provider":"LongBoost Performance Parts","version":"1.0","type":"link"}