VCM Sensors & Wiring

2 BAR MAP Sensor Direct replacement 2 BAR MAP sensor to suit VT - VE (early). Used in boosted applications. Interchange Part Number: 12614973...

2 Bar to 2.7 Bar Conversion Loom VCM Performance conversion loom to suit any Commodore from VT-VF. This conversion loom is used when upgrading from...

VCM Performance 2.7 Bar MAP Sensor 2.7 BAR MAP sensor for use in Late model VE/VF Commodores. **Can be used in earlier Commodores (pre-2010) with a...

E38 Bench Programming Harness Bench Programming Harness To Suit E38 PCM - Allows for tuning of PCM's without having the car present. Optional T43 ...

Upgrade your LS1 with modern LS3 injectors using our Late-to-Early Injector Conversion Adapter set. These adaptors allow a straight swap of late-mo...

VCM VE Intake Air Temp (IAT) Extension HarnessVCM Performance IAT extension looms allow for the placement of an IAT sensor (also available) in an a...

VCM VZ Intake Air Temp (IAT) Extension HarnessVCM Performance IAT extension looms allow for the placement of an IAT sensor (also available) in an a...

VCM Late Knock Sensor Conversion Loom.Match the selected part number and configuration to your application before ordering.Part numbers and options...

Late MAP sensor extension loom. SKU: V052012Part numbers and optionsV052012Availability: Contact LongBoost to confirm current availability and disp...

LS1 Bench Programming HarnessBench Programming Harness To Suit LS1 PCM - Allows for tuning of LS1 PCM's without having the car present.Part numbers...

The VCM LS1 Knock Extension Harness is the suitable extension for the GM 12589867 KNOCK SENSOR SUITS LS1 V8Part numbers and optionsV052010Availabil...

VCM Performance LS1 CAM Sensor HarnessRequired when converting from LS1 camshaft sensor position to the front timing case on the later engines. Als...

Overview VCM Performance LS1 Map Sensor Harness is required when transplanting a late model engine into an LS1. Must use when fitting a late model...

Plug and play wiring harness when retaining the MAF after fitting one of our VCM Plastic OTR. SKU: VZ LS1/LS2, V052011 SKU: VZ-VF, L76/L77/L98/LS3 ...

MAP Sensor Bush Reducer and MAP Sensor Retaining ClampPart numbers and options BUSH REDUCER — V010258 MAP SENSOR RETAINING CLAMP — V010259 BUSH AND...

VCM Performance Early O2 Extension Harness The o2 sensor loom extension to suit LS1 powered vehicles 1999-2005 5.7L. Note: This is the rear sensor...

VCM Performance Injector Conversion Looms This VCM Performance injector harness Loom kit allows the fitment of GEN3 (Early) injectors into a GEN4 (...

VCM Performance Intake Air Temp (IAT) Sensor VCM Performance Late IAT Sensor - Used for MAF-less intake installation & Plug n' Play with the VC...

VCM Performance Late O2 Extension HarnessO2 Extension to suit VZ, VE, VE2 and VF1 Front O2 oxygen sensors. A must when upgrading the exhaust and th...

VCM Performance Late O2 Extension Harness The o2 sensor loom extension to suit VF & VF GTS (LSA). SKU: V052015Part numbers and optionsV052015Av...

VCM VT-VY Intake Air Temp (IAT) Extension Harness VCM Performance IAT extension looms allow for the placement of an IAT sensor (also available) in ...

VCM Wiring Tail Connector, ZL1 Fuel Module.Match the selected part number and configuration to your application before ordering.Part numbers and op...

VCM Wiring Tail, Hobbs Switch 041017.Match the selected part number and configuration to your application before ordering.Part numbers and optionsH...