Raceworks External 60mm EFI Pump
Raceworks Ext 60Mm E85 Efi 044 Style,
Specifications
310LPH @ 3Bar (13.5V). For flow details at and current draw 13.5V please consult chart below. 044 Equivalent, 60.5mm Pump Diameter, External Check Valve
For intank use, use strainer available HERE
Inlet Options
Specifications
AN-6 Adapter
Part Number
Specifications
AN-8 Adapter
Part Number
Specifications
AN-10 Adapter
Part Number
Specifications
AN-12 Adapter
Part Number
Specifications
3/8″ Barb Adapter
Part Number
Specifications
1/2″ Barb Adapter
Part Number
Specifications
5/8″ Barb Adapter
Part Number
Specifications
AN-8 Female Swivel Adapter
Part Number
Outlet Options
Using included Check Valve
Specifications
AN-6 Banjo Kit
Part Number
Specifications
AN-8 Banjo Kit
Part Number
Specifications
5/16″ Barb Banjo Kit
Part Number
Specifications
3/8″ Barb Banjo Kit
Part Number
Note: when using the included Check Valve with a banjo kit, outlet will be on a right angle to the pump.
Using a High Flow Inline Check Valve
Specifications
AN-6
Part Number
Specifications
AN-8
Part Number
Using No Check Valve
Specifications
AN-6 Adapter
Part Number
Specifications
AN-8 Adapter
Part Number
Specifications
AN-10 Adapter
Part Number
Specifications
5/16″ Barb Adapter
Part Number
Specifications
3/8″ Barb Adapter
Part Number
Specifications
1/2″ Barb Adapter
Part Number
What is a Check Valve?
A Check Valve, also known as a one-way valve, allows flow in one direction only, and prevents back flow (reverse flow). In the case of a fuel system, this valve ensures that fuel pressure in the line is maintained, allowing the engine to start faster even if the fuel system has not been sufficiently primed.
For Wiring Kits Click Here! (RWM-052 PART NUMBER)